P2273 2018 Chevrolet Silverado Code - HO2S Signal Stuck Rich Bank 2 Sensor 2
Quick Answer
The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2273 2018 Chevrolet Silverado indicates HO2S Signal Stuck Rich Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P2273 2018 Chevrolet Silverado Description
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM does not detect an HO2S voltage less than 100 mV before accumulated mass airflow exceeds a calibrated value.
What are the Possible Causes of the DTC P2273 2018 Chevrolet Silverado?
- Faulty Heated Oxygen Bank 2 Sensor 2
- Heated Oxygen Bank 2 Sensor 2 harness is open or shorted
- Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection
- Low or high fuel system pressure
- Fuel contamination
- Faulty fuel injectors
- Exhaust gas leaks
- Engine vacuum leaks
How to Fix the DTC P2273 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2273 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2273 2018 Chevrolet Silverado code?
Need more information on how to fix the P2273 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2273 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2273 2018 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P2273 in a 2018 Chevrolet Silverado?
- Common symptoms include decreased fuel efficiency, rough idling, engine misfires, and the illumination of the check engine light.
2. What does "HO2S Signal Stuck Rich Bank 2 Sensor 2" mean in relation to code P2273?
- This means that the heated oxygen sensor (HO2S) located in bank 2, sensor 2 of the exhaust system is reporting a consistently rich air-fuel mixture to the engine control module.
3. What are the possible causes of OBDII code P2273 in a 2018 Chevrolet Silverado?
- Possible causes include a faulty oxygen sensor, issues with the fuel system (such as a leaking injector), vacuum leaks, exhaust leaks, or a problem with the engine's air intake system.
4. How can I diagnose OBDII code P2273 in my 2018 Chevrolet Silverado?
- Diagnosing this code typically involves using a diagnostic scanner to read the code, inspecting the HO2S in bank 2 sensor 2 for damage or contamination, checking for leaks in the exhaust system, and testing the fuel system components.
5. Can I continue driving my 2018 Chevrolet Silverado with OBDII code P2273?
- While the vehicle may still be operable with this code, it is recommended to address the issue promptly to prevent potential damage to the engine and ensure optimal performance.
6. How can I repair OBDII code P2273 in my 2018 Chevrolet Silverado?
- Repairing this code often involves replacing the HO2S in bank 2 sensor 2, addressing any underlying fuel or exhaust system issues, and clearing the code with a diagnostic scanner.
7. Are there any DIY tips for addressing OBDII code P2273 in a 2018 Chevrolet Silverado?
- DIY tips include visually inspecting the oxygen sensor for damage, checking for loose or disconnected wiring, and ensuring the air intake system is free from leaks or obstructions.
8. How much does it typically cost to fix OBDII code P2273 in a 2018 Chevrolet Silverado?
- The cost of fixing this code can vary depending on the specific issue, but it may range from around $200 to $500 for parts and labor at a professional repair shop.
9. Is OBDII code P2273 a serious issue in a 2018 Chevrolet Silverado?
- While the severity of the issue can vary, it is important to address this code promptly to prevent potential damage to the engine and maintain the vehicle's performance and fuel efficiency.
10. Can a faulty oxygen sensor cause OBDII code P2273 in a 2018 Chevrolet Silverado?
- Yes, a faulty oxygen sensor in bank 2 sensor 2 can cause the HO2S signal to stay rich, triggering OBDII code P2273 in a 2018 Chevrolet Silverado.
Discuss the causes and fixes for P2273 2018 Chevrolet Silverado OBDII Code
Code P2273 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
