AutoCodes – Chevrolet – P2271 2014 Chevrolet Silverado

P2271 2014 Chevrolet Silverado Code - HO2S Signal Stuck Rich Bank 1 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2271 2014 Chevrolet Silverado indicates HO2S Signal Stuck Rich Bank 1 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 499

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 28, 2022

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2271 2014 Chevrolet Silverado Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM does not detect an HO2S voltage less than 100 mV before accumulated mass airflow exceeds a calibrated value.

OBDII Code P2271 2014 Chevrolet Silverado - HO2S Signal Stuck Rich Bank 1 Sensor 2 - AutoCodes.com — P2271 2014 Chevrolet Silverado Code - HO2S Signal Stuck Rich Bank 1 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P2271 2014 Chevrolet Silverado?

Faulty Heated Oxygen Bank 1 Sensor 2
Heated Oxygen Bank 1 Sensor 2 harness is open or shorted
Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection
Low or high fuel system pressure
Fuel contamination
Faulty fuel injectors
Exhaust gas leaks
Engine vacuum leaks

How to Fix the DTC P2271 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Rear Heated Oxygen Sensors (HO2S) usually takes care of the problem.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2271 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2271 2014 Chevrolet Silverado code?

Need more information on how to fix the P2271 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2271 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2271 2014 Chevrolet Silverado Code

1. What does OBDII code P2271 mean for my 2014 Chevrolet Silverado?

- This code indicates a problem with the HO2S (Heated Oxygen Sensor) signal being stuck rich on Bank 1 Sensor 2 in your vehicle.

2. What are the common symptoms of OBDII code P2271 in a 2014 Chevrolet Silverado?

- Common symptoms include decreased fuel efficiency, rough idling, engine misfires, and potentially a noticeable decrease in overall engine performance.

3. What are the possible causes of OBDII code P2271 in a 2014 Chevrolet Silverado?

- The code P2271 can be triggered by issues such as a faulty oxygen sensor, a vacuum leak, a malfunctioning fuel injector, a contaminated sensor, or problems with the engine's air-fuel ratio.

4. How do I diagnose the OBDII code P2271 in my 2014 Chevrolet Silverado?

- To diagnose this code, you may need to perform a visual inspection of the sensor and its wiring, conduct tests on the sensor's voltage output, and check for any leaks in the intake system.

5. Can I continue driving my 2014 Chevrolet Silverado with OBDII code P2271?

- It's generally not recommended to continue driving with this code active, as it can lead to poor engine performance and potential damage if left unresolved.

6. How can I repair OBDII code P2271 in my 2014 Chevrolet Silverado?

- Repair options may include replacing the Bank 1 Sensor 2 oxygen sensor, addressing any vacuum leaks, cleaning or replacing the fuel injector, or correcting any issues with the air-fuel ratio.

7. Is it possible to reset OBDII code P2271 in a 2014 Chevrolet Silverado without fixing the underlying issue?

- While you can clear the code with a scanner, it's important to address the root cause to prevent the issue from reoccurring and potentially causing further damage to the vehicle.

8. Do I need special tools to fix OBDII code P2271 in my 2014 Chevrolet Silverado?

- Depending on the specific repair needed, you may require basic tools such as a socket set, a multimeter, and possibly an oxygen sensor socket for replacement.

9. How much does it cost to repair OBDII code P2271 in a 2014 Chevrolet Silverado?

- The cost of repairs can vary based on the specific issue causing the code, but it's advisable to consult with a mechanic for a proper diagnosis and estimate.

10. Can a DIY enthusiast tackle the repair for OBDII code P2271 in a 2014 Chevrolet Silverado?

- While some aspects of the repair may be DIY-friendly, dealing with sensors and fuel systems can be complex, so it's recommended to have a good understanding of automotive systems before attempting the repair.