AutoCodes – Generic – P226C

P226C Code - Turbocharger Boost Control 'A' Slow Response

Quick Answer

The Variable Geometry Turbocharger (VGT) adjusts turbocharger performance by moving the position of the impeller nozzle, on the high-pressure (engine exhaust gas) side of the turbocharger assembly. Common causes include Powertrain Control Module (PCM) calibration update, Faulty Electronic Turbo Actuator, Faulty Turbocharger. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P226C indicates Turbocharger Boost Control 'A' Slow Response.
Common causes: Common causes include Powertrain Control Module (PCM) calibration update, Faulty Electronic Turbo Actuator, Faulty Turbocharger.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 942

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P226C Description

The Variable Geometry Turbocharger (VGT) adjusts turbocharger performance by moving the position of the impeller nozzle, on the high-pressure (engine exhaust gas) side of the turbocharger assembly. The desired position of the actuator is commanded by the Powertrain Control Module (PCM). The actual position is sensed by the VGT and reported back to the PCM as feedback. Discrepancy in position feedback sent to the module, and commanded position sent to the VGT by more than a prescribed amount will result in failure of device rationality diagnostics. Failure to properly actuate the VGT will result in poor engine performance. The PCM lights the MIL lamp after the diagnostic runs and fails in two drive cycles. The PCM will turn off the MIL lamp immediately after this diagnostic runs and passes in four consecutive drive cycles. The Diagnostic Trouble Code (DTC) will be set when the PCM detects that the VGT is slow in responding to its commanded position.

OBDII Code P226C - Turbocharger Boost Control 'A' Slow Response - AutoCodes.com — P226C Code - Turbocharger Boost Control 'A' Slow Response

What does this mean?

What are the Possible Causes of the DTC P226C?

Powertrain Control Module (PCM) calibration update
Faulty Electronic Turbo Actuator
Faulty Turbocharger

How to Fix the DTC P226C?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P226C code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P226C code?

Need more information on how to fix the P226C code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P226C code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P226C Dodge — Turbocharger Boost Control 'A' Slow Response
P226C RAM — Turbocharger Boost Control 'A' Slow Response

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.