AutoCodes – Ford – P2258 2011 Ford Fusion

P2258 2011 Ford Fusion Code - Secondary Air Injection System Control 'A' Circuit High

Quick Answer

An Air Pump is used on the vehicle to lower tail pipe emissions on start-up. Common causes include Faulty Secondary Air System Relay, Secondary Air System Relay harness is open or shorted, Secondary Air System Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2258 2011 Ford Fusion indicates Secondary Air Injection System Control 'A' Circuit High.
Common causes: Common causes include Faulty Secondary Air System Relay, Secondary Air System Relay harness is open or shorted, Secondary Air System Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,890

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2258 2011 Ford Fusion Description

An Air Pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air Pump Relay Control Circuit which energizes the Air Pump. The PCM also grounds the Air Combination Valve Vacuum Control Solenoid Circuit, which energizes the Air Vacuum Control Solenoid. Vacuum is then applied to both Air Combination Valve Diaphragms which opens the shut-off valves. The PCM enables both circuits simultaneously when Air System operation is desired. When the Air System is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut-off valves prevent air flow in either direction.

OBDII Code P2258 2011 Ford Fusion - Secondary Air Injection System Control 'A' Circuit High - AutoCodes.com — P2258 2011 Ford Fusion Code - Secondary Air Injection System Control 'A' Circuit High

What does this mean?

What are the Possible Causes of the DTC P2258 2011 Ford Fusion?

Faulty Secondary Air System Relay
Secondary Air System Relay harness is open or shorted
Secondary Air System Relay circuit poor electrical connection
Faulty Secondary Air System Pump

How to Fix the DTC P2258 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2258 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2258 2011 Ford Fusion code?

Need more information on how to fix the P2258 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2258 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2258 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P2258 in a 2011 Ford Fusion?

- Common symptoms include the check engine light coming on, rough engine idle, decreased fuel efficiency, and potential engine misfires.

2. What does the OBDII code P2258 'Secondary Air Injection System Control 'A' Circuit High' indicate in a 2011 Ford Fusion?

- This code indicates a problem with the secondary air injection system control circuit, specifically that the voltage is higher than normal.

3. What are the possible causes of OBDII code P2258 in a 2011 Ford Fusion?

- Possible causes include a faulty secondary air injection pump, damaged wiring or connectors in the circuit, a malfunctioning secondary air injection solenoid, or a faulty PCM (powertrain control module).

4. How can I diagnose the OBDII code P2258 in my 2011 Ford Fusion?

- Diagnosis typically involves using a scan tool to retrieve the code, inspecting the secondary air injection system components for damage, and testing the circuit for proper voltage levels.

5. Can I continue driving my 2011 Ford Fusion with OBDII code P2258?

- It is not recommended to continue driving with this code present, as it can lead to further damage to the engine and emissions system. It is advisable to address the issue promptly.

6. How do I repair OBDII code P2258 in a 2011 Ford Fusion?

- Repair may involve replacing the secondary air injection pump, repairing or replacing damaged wiring or connectors, replacing the secondary air injection solenoid, or reprogramming the PCM if necessary.

7. Is it possible to reset the OBDII code P2258 in a 2011 Ford Fusion without fixing the underlying issue?

- While you can clear the code with a scan tool, it will likely return if the root cause of the problem is not addressed. It is best to diagnose and repair the issue to prevent further problems.

8. How much does it typically cost to repair OBDII code P2258 in a 2011 Ford Fusion?

- The cost of repair can vary depending on the specific cause of the issue and labor rates in your area. It's best to consult with a mechanic for an accurate estimate.

9. Can a DIY enthusiast fix OBDII code P2258 in a 2011 Ford Fusion?

- Depending on your skill level and access to tools, you may be able to address simpler causes like damaged wiring or connectors. However, more complex issues may require professional assistance.

10. Will OBDII code P2258 cause my 2011 Ford Fusion to fail an emissions test?

- Yes, this code is related to the emissions control system, and if not resolved, it can cause your vehicle to fail an emissions test. It's important to address the issue before undergoing emissions testing.