AutoCodes – Toyota – P2253 2007 Toyota Highlander

P2253 2007 Toyota Highlander Code - A/F Sensor Bank 1 Short Circuit

Quick Answer

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio. Common causes include Faulty Air/Fuel Sensor Bank 1, Air/Fuel Sensor Bank 1 harness is open or shorted, Air/Fuel Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2253 2007 Toyota Highlander indicates A/F Sensor Bank 1 Short Circuit.
Common causes: Common causes include Faulty Air/Fuel Sensor Bank 1, Air/Fuel Sensor Bank 1 harness is open or shorted, Air/Fuel Sensor Bank 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,123

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2253 2007 Toyota Highlander Description

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio.
The A/F sensor output voltage is used to provide feedback for the Engine Control Module (ECM) to control the air-fuel ratio.
With the A/F sensor output, the ECM can determine deviation from the stoichiometric air-fuel ratio and control proper injection time. If the A/F sensor is malfunctioning, the ECM is unable to accurately control air-fuel ratio.
The A/F sensor is equipped with a heater which heats the zirconia element. The heater is also controlled by the ECM. When the intake air volume is low (the temperature of the exhaust gas is low), current flows to the heater which heats the sensor to facilitate detection of accurate oxygen concentration.
The A/F sensor is a planar type. Compared to a conventional type, the sensor and heater portions are narrower. Because the heat of the heater is conducted through the alumina to zirconia (of the sensor portion), sensor activation is accelerated.

The code is output when there is an open or short in the A/F sensor circuit, or if A/F sensor output drops. To detect these problems, the voltage of the A/F sensor is monitored when turning the ignition switch to the ON position, and the admittance (admittance is an electrical term that indicates the ease of flow of current) is checked while driving. If the voltage of the A/F sensor is between 0.6 V and 4.5 V, it is considered normal. If the voltage is outside of the specified range, or the admittance is less than the standard value, the ECM will determine that there is a malfunction in the A/F sensor. If the same malfunction is detected in the next driving cycle, the MIL is illuminated and a DTC is set.

OBDII Code P2253 2007 Toyota Highlander - A/F Sensor Bank 1 Short Circuit - AutoCodes.com — P2253 2007 Toyota Highlander Code - A/F Sensor Bank 1 Short Circuit

What does this mean?

What are the Possible Causes of the DTC P2253 2007 Toyota Highlander?

Faulty Air/Fuel Sensor Bank 1
Air/Fuel Sensor Bank 1 harness is open or shorted
Air/Fuel Sensor Bank 1 circuit poor electrical connection
Air/Fuel Sensor Relay
Faulty Engine Control Module (ECM)

How to Fix the DTC P2253 2007 Toyota Highlander?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2253 2007 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2253 2007 Toyota Highlander code?

Need more information on how to fix the P2253 2007 Toyota Highlander code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2253 2007 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2253 2007 Toyota Highlander Code

1. What are the common symptoms of OBDII code P2253 in a 2007 Toyota Highlander?

- Common symptoms include poor fuel efficiency, rough engine idling, and the illumination of the Check Engine Light.

2. What does the OBDII code P2253 "A/F Sensor Bank 1 Short Circuit" mean for a 2007 Toyota Highlander?

- This code indicates that there is a short circuit in the Air/Fuel (A/F) sensor for Bank 1 in the vehicle's exhaust system.

3. What are the possible causes of OBDII code P2253 in a 2007 Toyota Highlander?

- Potential causes include a faulty A/F sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).

4. How can I diagnose the issue related to OBDII code P2253 in my 2007 Toyota Highlander?

- You can use an OBDII scanner to retrieve the code and further diagnose the A/F sensor and its related components for any signs of damage or malfunction.

5. Is it safe to continue driving my 2007 Toyota Highlander with OBDII code P2253 present?

- It is recommended to address the issue promptly to avoid potential damage to the vehicle's engine and exhaust system. Continuing to drive with this code may lead to decreased performance and increased emissions.

6. Can I repair OBDII code P2253 in my 2007 Toyota Highlander myself?

- Depending on your level of automotive knowledge and experience, you may be able to replace the A/F sensor or repair wiring issues yourself. However, it is advisable to consult a professional mechanic for accurate diagnosis and repair.

7. How much does it typically cost to repair OBDII code P2253 in a 2007 Toyota Highlander?

- The cost of repair can vary depending on the exact cause of the issue. Replacement A/F sensors can range from $100 to $300, and additional costs may apply for labor and diagnostic fees.

8. Are there any preventive maintenance tips to avoid OBDII code P2253 in my 2007 Toyota Highlander?

- Regularly inspecting and maintaining the A/F sensor, as well as checking the condition of related wiring and connectors, can help prevent issues that trigger this code.

9. Can a faulty oxygen sensor trigger OBDII code P2253 in my 2007 Toyota Highlander?

- While a faulty oxygen sensor is not a direct cause of P2253, it can indirectly affect the A/F sensor operation and lead to related issues. It's essential to address any sensor problems promptly.

10. How long does it take to repair OBDII code P2253 in a 2007 Toyota Highlander?

- The repair time can vary depending on the exact cause of the issue and the availability of parts. In general, a professional mechanic can typically diagnose and repair the problem within a few hours to a day.