AutoCodes – Toyota – P2253 2007 Toyota Camry

P2253 2007 Toyota Camry Code - Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1

Quick Answer

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio. Common causes include Faulty Air/Fuel Sensor Bank 1, Air/Fuel Sensor Bank 1 harness is open or shorted, Air/Fuel Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2253 2007 Toyota Camry indicates Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1.
Common causes: Common causes include Faulty Air/Fuel Sensor Bank 1, Air/Fuel Sensor Bank 1 harness is open or shorted, Air/Fuel Sensor Bank 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,014

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 04, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2253 2007 Toyota Camry Description

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio.
The A/F sensor output voltage is used to provide feedback for the Engine Control Module (ECM) to control the air-fuel ratio.
With the A/F sensor output, the ECM can determine deviation from the stoichiometric air-fuel ratio and control proper injection time. If the A/F sensor is malfunctioning, the ECM is unable to accurately control air-fuel ratio.
The A/F sensor is equipped with a heater which heats the zirconia element. The heater is also controlled by the ECM. When the intake air volume is low (the temperature of the exhaust gas is low), current flows to the heater which heats the sensor to facilitate detection of accurate oxygen concentration.
The A/F sensor is a planar type. Compared to a conventional type, the sensor and heater portions are narrower. Because the heat of the heater is conducted through the alumina to zirconia (of the sensor portion), sensor activation is accelerated.

The code is output when there is an open or short in the A/F sensor circuit, or if A/F sensor output drops. To detect these problems, the voltage of the A/F sensor is monitored when turning the ignition switch to the ON position, and the admittance (admittance is an electrical term that indicates the ease of flow of current) is checked while driving. If the voltage of the A/F sensor is between 0.6 V and 4.5 V, it is considered normal. If the voltage is outside of the specified range, or the admittance is less than the standard value, the ECM will determine that there is a malfunction in the A/F sensor. If the same malfunction is detected in the next driving cycle, the MIL is illuminated and a DTC is set.

OBDII Code P2253 2007 Toyota Camry - Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1 - AutoCodes.com — P2253 2007 Toyota Camry Code - Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P2253 2007 Toyota Camry?

Faulty Air/Fuel Sensor Bank 1
Air/Fuel Sensor Bank 1 harness is open or shorted
Air/Fuel Sensor Bank 1 circuit poor electrical connection
Air/Fuel Sensor Relay
Faulty Engine Control Module (ECM)

How to Fix the DTC P2253 2007 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2253 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2253 2007 Toyota Camry code?

Need more information on how to fix the P2253 2007 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2253 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2253 2007 Toyota Camry Code

1. What are the common symptoms of OBDII code P2253 in a 2007 Toyota Camry?

- Common symptoms include poor fuel efficiency, rough idling, engine misfires, and the illumination of the check engine light.

2. What does the OBDII code P2253 "Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1" mean in a 2007 Toyota Camry?

- This code indicates that there is a high voltage condition in the reference ground circuit of the oxygen (A/F) sensor for Bank 1 Sensor 1 in the vehicle's exhaust system.

3. What are some possible causes of OBDII code P2253 in a 2007 Toyota Camry?

- Potential causes include a faulty oxygen (A/F) sensor, damaged wiring or connectors in the sensor circuit, a short to power or ground in the circuit, or a malfunctioning Engine Control Module (ECM).

4. How can I diagnose the OBDII code P2253 in my 2007 Toyota Camry?

- Diagnosis typically involves using a scan tool to retrieve the code, inspecting the wiring and connectors related to the oxygen (A/F) sensor, checking for shorts or open circuits, and testing the sensor's voltage output.

5. Is it safe to continue driving my 2007 Toyota Camry with OBDII code P2253 present?

- It is generally not recommended to drive the vehicle with this code active, as it can lead to decreased fuel efficiency and potential engine performance issues.

6. Can I repair OBDII code P2253 in my 2007 Toyota Camry myself?

- Depending on your level of automotive experience, you may be able to replace the oxygen (A/F) sensor or repair wiring issues yourself. However, advanced diagnostics and troubleshooting may require professional assistance.

7. What are the typical repair options for OBDII code P2253 in a 2007 Toyota Camry?

- Repair options may include replacing the oxygen (A/F) sensor, repairing damaged wiring or connectors, clearing the code with a scan tool, and retesting the system to ensure the issue is resolved.

8. How much does it cost to fix OBDII code P2253 in a 2007 Toyota Camry?

- Repair costs can vary depending on the specific issue causing the code and whether you choose to do the repairs yourself or seek professional help. Costs may include parts, labor, and diagnostic fees.

9. Can a faulty oxygen (A/F) sensor cause other OBDII codes to appear in a 2007 Toyota Camry?

- Yes, a malfunctioning oxygen (A/F) sensor can impact the vehicle's air-fuel ratio and emissions control system, potentially triggering other related OBDII codes in the ECM.

10. How can I prevent OBDII code P2253 from recurring in my 2007 Toyota Camry?

- To prevent this code from recurring, regular maintenance of the oxygen (A/F) sensor, wiring, and related components is essential. Keeping up with scheduled tune-ups and addressing any issues promptly can help maintain proper sensor function.