AutoCodes – Toyota – P2239 2017 Toyota RAV4

P2239 2017 Toyota RAV4 Code - A/F Sensor Bank 1 Short Circuit

Quick Answer

The Air Fuel Ratio (A/F) sensor generates a voltage that corresponds to the actual air-fuel ratio. Common causes include Faulty Air Fuel Ratio (A/F) Sensor Bank 1 Sensor 1, Air Fuel Ratio Sensor Bank 1 Sensor 1 harness is open or shorted, Air Fuel Ratio Sensor Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2239 2017 Toyota RAV4 indicates A/F Sensor Bank 1 Short Circuit.
Common causes: Common causes include Faulty Air Fuel Ratio (A/F) Sensor Bank 1 Sensor 1, Air Fuel Ratio Sensor Bank 1 Sensor 1 harness is open or shorted, Air Fuel Ratio Sensor Bank 1 Sensor 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 234

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2239 2017 Toyota RAV4 Description

The Air Fuel Ratio (A/F) sensor generates a voltage that corresponds to the actual air-fuel ratio. This sensor voltage is used to provide the Engine Control Module (ECM) with feedback so that it can control the air-fuel ratio. The ECM determines the deviation from the stoichiometric air-fuel ratio level and regulates the fuel injection duration. If the air-fuel ratio sensor malfunctions, the ECM is unable to control the air-fuel ratio accurately.
The air-fuel ratio sensor is a planar type and is integrated with the heater, which heats the solid electrolyte (zirconia element). This heater is controlled by the ECM. When the intake air volume is low (the exhaust gas temperature is low), a current flows into the heater to heat the sensor, in order to facilitate accurate oxygen concentration detection. In addition, the sensor and heater portions are narrow types. The heat generated by the heater is conducted to the solid electrolyte through the alumina, and therefore sensor activation is accelerated.
In order to obtain a high purification rate of the carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NOx) components in the exhaust gas, a three-way catalytic converter is used. For the most efficient use of the three-way catalytic converter, the air-fuel ratio must be precisely controlled so that it is always close to the stoichiometric level.
The Diagnostic Trouble Code (DTC) is set when there is an open or short in the air-fuel ratio sensor circuit, or if the air-fuel ratio sensor output drops. To detect these problems, the voltage of the air-fuel ratio sensor is monitored when turning the ignition switch to ON, and the admittance (admittance is an electrical term that indicates the ease of flow of current) is checked while driving. If the voltage of the air-fuel ratio sensor is between 0.6 V and 4.5 V, it is considered normal. If the voltage is out of the specified range, or the admittance is less than the standard value, the ECM determines that there is a malfunction in the air-fuel ratio sensor. If the same malfunction is detected in the next driving cycle, the MIL is illuminated, and a DTC is stored.

OBDII Code P2239 2017 Toyota RAV4 - A/F Sensor Bank 1 Short Circuit - AutoCodes.com — P2239 2017 Toyota RAV4 Code - A/F Sensor Bank 1 Short Circuit

What does this mean?

What are the Possible Causes of the DTC P2239 2017 Toyota RAV4?

Faulty Air Fuel Ratio (A/F) Sensor Bank 1 Sensor 1
Air Fuel Ratio Sensor Bank 1 Sensor 1 harness is open or shorted
Air Fuel Ratio Sensor Bank 1 Sensor 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2239 2017 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2239 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2239 2017 Toyota RAV4 code?

Need more information on how to fix the P2239 2017 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2239 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2239 2017 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2239 in a 2017 Toyota RAV4?

- Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the Check Engine Light.

2. What does the OBDII code P2239 "A/F Sensor Bank 1 Short Circuit" mean in a 2017 Toyota RAV4?

- This code indicates that there is a short circuit in the Air/Fuel Ratio Sensor for Bank 1, which can disrupt the vehicle's air/fuel mixture.

3. What are the possible causes of OBDII code P2239 in a 2017 Toyota RAV4?

- Possible causes include a faulty A/F sensor, damaged wiring or connectors, a blown fuse, or issues with the engine control module.

4. How can I diagnose the OBDII code P2239 in my 2017 Toyota RAV4?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the A/F sensor and related components for damage, and testing the sensor's voltage and resistance.

5. Can I continue driving my 2017 Toyota RAV4 with OBDII code P2239 active?

- It is generally not recommended to drive with this code active, as it can lead to reduced performance and potential damage to other engine components.

6. How can I repair OBDII code P2239 in my 2017 Toyota RAV4?

- Repair options may include replacing the A/F sensor, repairing or replacing damaged wiring or connectors, checking and replacing fuses if necessary, and clearing the code with an OBDII scanner.

7. Is it possible to clear the OBDII code P2239 in a 2017 Toyota RAV4 without fixing the issue?

- Clearing the code without addressing the underlying issue is not recommended, as the problem will likely persist and could lead to further issues down the line.

8. Are there any maintenance tips to prevent OBDII code P2239 in a 2017 Toyota RAV4?

- Regularly inspecting and maintaining the A/F sensor, checking the wiring for any signs of damage, and ensuring the engine control module is functioning properly can help prevent this code from appearing.

9. How long does it typically take to repair OBDII code P2239 in a 2017 Toyota RAV4?

- The repair time can vary depending on the exact cause of the code and the availability of parts, but it may take anywhere from 1 to 3 hours to complete the repair.

10. Can I reset the Check Engine Light after fixing OBDII code P2239 in my 2017 Toyota RAV4?

- Yes, once the issue causing the code has been repaired, you can use an OBDII scanner to reset the Check Engine Light and clear the stored code from the vehicle's memory.