AutoCodes – Dodge – P2236 Dodge

P2236 Dodge Code - O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 3

Quick Answer

Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Oxygen (O2) Sensor Bank 2 Sensor 3, Oxygen (O2) Sensor Bank 2 Sensor 3 harness is open or shorted, Oxygen (O2) Sensor Bank 2 Sensor 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2236 Dodge indicates O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 3.
Common causes: Common causes include Faulty Oxygen (O2) Sensor Bank 2 Sensor 3, Oxygen (O2) Sensor Bank 2 Sensor 3 harness is open or shorted, Oxygen (O2) Sensor Bank 2 Sensor 3 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,767

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2236 Dodge Description

Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.

OBDII Code P2236 Dodge - O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 3 - AutoCodes.com — P2236 Dodge Code - O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 3

What does this mean?

What are the Possible Causes of the DTC P2236 Dodge?

Faulty Oxygen (O2) Sensor Bank 2 Sensor 3
Oxygen (O2) Sensor Bank 2 Sensor 3 harness is open or shorted
Oxygen (O2) Sensor Bank 2 Sensor 3 circuit poor electrical connection

How to Fix the DTC P2236 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2236 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2236 Dodge code?

Need more information on how to fix the P2236 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2236 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2236 Dodge Code

1. What does OBDII code P2236 mean for a Dodge vehicle?

P2236 indicates an issue with the oxygen (O2) sensor signal circuit shorted to the heater circuit on Bank 2 Sensor 3.

2. What are the common symptoms of code P2236 in a Dodge?

Symptoms include an illuminated check engine light, reduced fuel efficiency, poor engine performance, and possible rough idling.

3. What causes the P2236 code to appear in a Dodge?

Common causes include a faulty O2 sensor, damaged wiring or connectors, a short circuit in the sensor or heater circuit, or an issue with the powertrain control module (PCM).

4. Which sensor is affected by code P2236?

The code refers to Bank 2 Sensor 3, which is typically the downstream oxygen sensor located after the catalytic converter on the second bank of cylinders.

5. How do I diagnose code P2236 in my Dodge?

Diagnose by inspecting the O2 sensor, wiring, and connectors for damage or corrosion, and using a multimeter to check for short circuits or continuity issues in the circuit.

6. Can I drive with the P2236 code on my Dodge?

Driving is possible but not recommended, as it can lead to higher emissions, reduced performance, and potential damage to other engine components over time.

7. How do I fix the P2236 code on a Dodge?

Repairs may include replacing the faulty O2 sensor, repairing or replacing damaged wiring, or addressing any PCM-related issues if needed.

8. How much does it cost to repair a P2236 code on a Dodge?

The cost depends on the specific repair needed, but O2 sensor replacement typically ranges between $150 and $300, including parts and labor.

9. Can a P2236 code cause the engine to fail emissions testing?

Yes, since the code affects the O2 sensor’s ability to monitor emissions, it can cause the vehicle to fail an emissions test.

10. How can I prevent the P2236 code from recurring in my Dodge?

Regular maintenance, inspecting and replacing worn-out O2 sensors, and ensuring wiring and connectors are in good condition can help prevent this code from recurring.