AutoCodes – Dodge – P2214 Dodge

P2214 Dodge Code - NOx Sensor Circuit Range/Performance Bank 2

Quick Answer

The Nitrogen Oxide (NOx) sensor measures the amount of nitric oxide and nitrogen oxide in the exhaust system. Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2214 Dodge indicates NOx Sensor Circuit Range/Performance Bank 2.
Common causes
Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,376
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2214 Dodge Description

The Nitrogen Oxide (NOx) sensor measures the amount of nitric oxide and nitrogen oxide in the exhaust system. When the NOx sensor indicates that the storage capacity has been reached, the regeneration phase is initiated by the fueling management system. The Powertrain Control Module (PCM) monitors the NOx sensor and sets the code when the NOx sensor circuit voltage reading is not within the normal operating threshold for a specific engine bank.
OBDII Code P2214 Dodge - NOx Sensor Circuit Range/Performance Bank 2 - AutoCodes.com
P2214 Dodge Code - NOx Sensor Circuit Range/Performance Bank 2

What are the Possible Causes of the DTC P2214 Dodge?

  • Faulty Nitrogen Oxide (NOx) Sensor
  • Nitrogen Oxide (NOx) Sensor harness is open or shorted
  • Nitrogen Oxide (NOx) Sensor circuit poor electrical connection

How to Fix the DTC P2214 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2214 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2214 Dodge code?

Need more information on how to fix the P2214 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2214 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2214 Dodge Code

What does the OBDII code P2214 mean on a Dodge vehicle?

P2214 indicates an issue with the NOx (Nitrogen Oxide) sensor circuit on Bank 2, where the sensor's performance is outside the expected range.

What are the common symptoms of code P2214 in a Dodge?

Common symptoms include the check engine light turning on, reduced fuel efficiency, poor engine performance, and possible emissions test failure.

What causes the P2214 code on a Dodge?

Possible causes include a faulty NOx sensor, damaged or corroded wiring, a poor electrical connection, or an issue with the engine control module (ECM).

How can I diagnose the P2214 code on my Dodge?

Diagnosis involves using an OBDII scanner to confirm the code, inspecting the NOx sensor and wiring for damage, and testing the sensor with a multimeter to check its functionality.

Can I drive my Dodge with the P2214 code active?

While the vehicle may still be drivable, it's not recommended because it can lead to reduced performance, higher emissions, and potential damage to other components.

How do I fix the P2214 code on a Dodge?

Repairs may include replacing the faulty NOx sensor, repairing damaged wiring, cleaning corroded connections, or updating/reprogramming the ECM if necessary.

Where is the Bank 2 NOx sensor located on a Dodge?

The Bank 2 NOx sensor is typically located downstream of the catalytic converter on the side of the engine opposite Bank 1.

How much does it cost to fix the P2214 code on a Dodge?

Repair costs can range from $200 to $600 or more, depending on whether the NOx sensor needs replacement and labor rates in your area.

Can a dirty or clogged catalytic converter cause the P2214 code?

Yes, a clogged or malfunctioning catalytic converter can affect NOx sensor readings and potentially trigger the P2214 code.

Will clearing the P2214 code with a scanner fix the issue?

Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.

Discuss the causes and fixes for P2214 Dodge OBDII Code

Code P2214 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play