AutoCodes – Dodge – P2212 Dodge

P2212 Dodge Code - NOx Sensor Heater Sense Circuit Intermittent Bank 1

Quick Answer

The Nitrogen Oxide (NOx) sensor measures the amount of nitric oxide and nitrogen oxide in the exhaust system. Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2212 Dodge indicates NOx Sensor Heater Sense Circuit Intermittent Bank 1.
Common causes
Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,945
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2212 Dodge Description

The Nitrogen Oxide (NOx) sensor measures the amount of nitric oxide and nitrogen oxide in the exhaust system. When the NOx sensor indicates that the storage capacity has been reached, the regeneration phase is initiated by the fueling management system. The Powertrain Control Module (PCM) monitors the NOx sensor and sets the code when the NOx sensor circuit voltage reading is not within the normal operating threshold for a specific engine bank.
OBDII Code P2212 Dodge - NOx Sensor Heater Sense Circuit Intermittent Bank 1 - AutoCodes.com
P2212 Dodge Code - NOx Sensor Heater Sense Circuit Intermittent Bank 1

What are the Possible Causes of the DTC P2212 Dodge?

  • Faulty Nitrogen Oxide (NOx) Sensor
  • Nitrogen Oxide (NOx) Sensor harness is open or shorted
  • Nitrogen Oxide (NOx) Sensor circuit poor electrical connection

How to Fix the DTC P2212 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2212 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2212 Dodge code?

Need more information on how to fix the P2212 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2212 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2212 Dodge Code

What does the OBDII code P2212 mean on a Dodge vehicle?

P2212 indicates an intermittent issue in the NOx (Nitrogen Oxide) sensor heater sense circuit on Bank 1, which monitors and controls emissions.

What are the common symptoms of the P2212 code?

Symptoms may include the check engine light turning on, reduced fuel efficiency, failed emissions tests, and possible limp mode activation.

What causes the P2212 code to appear?

Common causes include a faulty NOx sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning engine control module (ECM).

Can I drive my Dodge with the P2212 code?

Driving with this code may be possible, but it can lead to increased emissions, reduced performance, and potential long-term damage to the emissions system.

How is the P2212 code diagnosed?

A mechanic will use an OBDII scanner to confirm the code, inspect the NOx sensor, check the wiring and connections, and test the heater circuit for proper operation.

How do you fix the P2212 code?

Repairs may involve replacing the NOx sensor, repairing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

What is the role of the NOx sensor heater?

The heater warms up the NOx sensor quickly, allowing it to accurately measure emissions even during cold starts.

Can a dirty or clogged sensor cause the P2212 code?

Yes, contamination or buildup on the NOx sensor can interfere with its operation and trigger the code.

What tools are needed to fix the P2212 code?

Basic tools include an OBDII scanner, multimeter, and potentially specialized tools for NOx sensor removal and replacement.

Is the P2212 code covered under warranty?

It may be covered if your vehicle is still under the emissions-related warranty. Check with your dealer for specifics.

Discuss the causes and fixes for P2212 Dodge OBDII Code

Code P2212 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play