AutoCodes – Chevrolet – P2209 2014 Chevrolet Silverado

P2209 2014 Chevrolet Silverado Code - NOx Sensor 1 Heater Control Circuit

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2209 2014 Chevrolet Silverado indicates NOx Sensor 1 Heater Control Circuit.
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 210

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2209 2014 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P2209 2014 Chevrolet Silverado - NOx Sensor 1 Heater Control Circuit - AutoCodes.com — P2209 2014 Chevrolet Silverado Code - NOx Sensor 1 Heater Control Circuit

What does this mean?

What are the Possible Causes of the DTC P2209 2014 Chevrolet Silverado?

Faulty Nitrogen Oxides (NOx) Sensor
Nitrogen Oxides Sensor harness is open or shorted
Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P2209 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2209 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2209 2014 Chevrolet Silverado code?

Need more information on how to fix the P2209 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2209 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2209 2014 Chevrolet Silverado Code

1. What does OBDII code P2209 for a 2014 Chevrolet Silverado indicate?

The code P2209 signifies an issue with the NOx Sensor 1's heater control circuit in your Chevrolet Silverado.

2. What are common symptoms of a P2209 fault in a 2014 Chevrolet Silverado?

Common symptoms include the Check Engine light illuminating, reduced engine performance, and potential failed emissions testing.

3. What are possible causes of a P2209 code in a 2014 Chevrolet Silverado?

Causes may include a faulty NOx sensor, damaged wiring or connectors, a failed heater circuit within the sensor, or issues with the vehicle's ECM.

4. How can I diagnose the P2209 code in my 2014 Chevrolet Silverado?

Diagnosis involves using an OBDII scanner to retrieve the specific fault code, inspecting wiring and connectors for damage, testing the NOx sensor's heater circuit, and checking for any related issues.

5. Can I continue driving my 2014 Chevrolet Silverado with a P2209 code?

It is not recommended to continue driving with a P2209 code as it can lead to increased emissions, reduced fuel efficiency, and potential engine damage if left unresolved.

6. How can I repair a P2209 fault in my 2014 Chevrolet Silverado?

Repair options include replacing the NOx sensor, repairing or replacing damaged wiring or connectors, addressing any ECM issues, and clearing the fault code with an OBDII scanner.

7. Are there any DIY tips for fixing a P2209 code in a 2014 Chevrolet Silverado?

While basic inspections and checks can be done by DIY enthusiasts, resolving a P2209 code may require specialized tools and expertise, so professional help is often recommended.

8. How much does it typically cost to repair a P2209 fault in a 2014 Chevrolet Silverado?

Costs can vary depending on the exact cause of the issue, but expect expenses for parts and labor to range from $200 to $500 or more for a professional repair.

9. Will a P2209 code reset itself in a 2014 Chevrolet Silverado?

The code may clear itself after a certain number of successful drive cycles if the underlying issue is resolved. However, it's advisable to diagnose and fix the problem to prevent future occurrences.

10. Can a P2209 fault in a 2014 Chevrolet Silverado affect vehicle safety?

While the P2209 code is related to emissions control and engine performance, a severe issue left unresolved could potentially impact overall vehicle operation and safety, so timely repairs are recommended.