AutoCodes – GMC – P2208 2018 GMC Sierra

P2208 2018 GMC Sierra Code - NOx Sensor 1 Heater Feedback Circuit

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2208 2018 GMC Sierra indicates NOx Sensor 1 Heater Feedback Circuit.
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 157

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2208 2018 GMC Sierra Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P2208 2018 GMC Sierra - NOx Sensor 1 Heater Feedback Circuit - AutoCodes.com — P2208 2018 GMC Sierra Code - NOx Sensor 1 Heater Feedback Circuit

What does this mean?

What are the Possible Causes of the DTC P2208 2018 GMC Sierra?

Faulty Nitrogen Oxides (NOx) Sensor
Nitrogen Oxides Sensor harness is open or shorted
Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P2208 2018 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2208 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2208 2018 GMC Sierra code?

Need more information on how to fix the P2208 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2208 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2208 2018 GMC Sierra Code

1. What does the OBDII code P2208 mean on a 2018 GMC Sierra?

P2208 indicates an issue with the NOx Sensor 1 Heater Feedback Circuit, which monitors the heater element in the nitrogen oxide (NOx) sensor responsible for emissions control.

2. What are the common symptoms of code P2208 in a GMC Sierra?

Symptoms may include the check engine light turning on, poor fuel efficiency, reduced engine performance, and potential emissions test failure.

3. What causes the P2208 code to appear?

Common causes include a faulty NOx sensor, a damaged or disconnected sensor wiring harness, a blown fuse, or a malfunctioning Engine Control Module (ECM).

4. Can I drive my 2018 GMC Sierra with the P2208 code active?

While the vehicle may still be drivable, it is not recommended to ignore this code, as it can lead to higher emissions, reduced fuel efficiency, and potential damage to other engine components.

5. How do I diagnose the P2208 code on my GMC Sierra?

Diagnosis typically involves inspecting the NOx sensor and its wiring for damage, checking for blown fuses, and using a scan tool to test the heater circuit's functionality.

6. How do I fix the P2208 code on a 2018 GMC Sierra?

Repairs may include replacing the faulty NOx sensor, repairing or replacing damaged wiring, checking and replacing fuses, or reprogramming/updating the ECM if necessary.

7. How much does it cost to repair a P2208 code in a GMC Sierra?

The cost can vary, but replacing the NOx sensor generally ranges from $300 to $700, depending on labor and parts costs.

8. Can a bad NOx sensor cause other problems in my GMC Sierra?

Yes, a failing NOx sensor can lead to increased emissions, reduced fuel economy, and potential damage to the catalytic converter if left unchecked.

9. What tools are needed to troubleshoot the P2208 code?

You will need an OBDII scan tool, a multimeter to test the circuit, and possibly a manufacturer-specific diagnostic tool for advanced testing.

10. Is the P2208 code covered under warranty for a 2018 GMC Sierra?

It may be covered under the vehicle's emissions warranty, which typically lasts longer than the standard warranty. Check with your dealership for confirmation.