AutoCodes – Ford – P2201 Ford

P2201 Ford Code - NOx Sensor Circuit Range/Performance Bank 1

Quick Answer

The Nitrogen Oxide (NOx) sensor measures the amount of nitric oxide and nitrogen oxide in the exhaust system. Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2201 Ford indicates NOx Sensor Circuit Range/Performance Bank 1.
Common causes: Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 35,676

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 30, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2201 Ford Description

The Nitrogen Oxide (NOx) sensor measures the amount of nitric oxide and nitrogen oxide in the exhaust system. When the NOx sensor indicates that the storage capacity has been reached, the regeneration phase is initiated by the fueling management system. The Powertrain Control Module (PCM) monitors the NOx sensor and sets the code when the NOx sensor circuit voltage reading is not within the normal operating threshold for a specific engine bank.

OBDII Code P2201 Ford - NOx Sensor Circuit Range/Performance Bank 1 - AutoCodes.com — P2201 Ford Code - NOx Sensor Circuit Range/Performance Bank 1

What does this mean?

What are the Possible Causes of the DTC P2201 Ford?

Faulty Nitrogen Oxide (NOx) Sensor
Nitrogen Oxide (NOx) Sensor harness is open or shorted
Nitrogen Oxide (NOx) Sensor circuit poor electrical connection

How to Fix the DTC P2201 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for the 2011-2012 F-Super Duty:
2011-2012 Ford F-Super Duty Factory Service Bulletin OBDII Code P2201

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2201 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2201 Ford code?

Need more information on how to fix the P2201 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2201 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2201 Ford Code

1. What are the common symptoms of OBDII code P2201 on a Ford vehicle?

- Common symptoms include poor engine performance, decreased fuel efficiency, and the illumination of the Check Engine Light.

2. What does the OBDII code P2201 Ford indicate?

- The code P2201 indicates an issue with the NOx (nitrogen oxide) sensor circuit in bank 1, specifically related to range/performance.

3. What are some possible causes of the P2201 Ford trouble code?

- Potential causes of the P2201 code include a faulty NOx sensor, wiring issues in the sensor circuit, exhaust system leaks, or a malfunctioning engine control module (ECM).

4. How can I diagnose the P2201 Ford code?

- Diagnosing the P2201 code typically involves using an OBDII scanner to retrieve the code, performing a visual inspection of the sensor and its wiring, and conducting tests to pinpoint the exact cause of the issue.

5. Can I still drive my Ford vehicle with the P2201 code present?

- It is generally not recommended to drive your vehicle extensively with the P2201 code present, as it can lead to further damage and reduced engine efficiency. It is best to address the issue promptly.

6. How can I repair the NOx sensor circuit range/performance issue indicated by code P2201 on my Ford?

- Repairing the P2201 code may involve replacing the NOx sensor, repairing any damaged wiring, fixing exhaust leaks, or reprogramming the ECM if necessary.

7. Are there any DIY tips for addressing the P2201 Ford code?

- While some basic troubleshooting like checking for loose connections or damaged wires can be done by DIY enthusiasts, resolving the P2201 code may require specialized tools and expertise, so it is often best to consult a professional mechanic.

8. How much does it cost to fix the P2201 Ford trouble code?

- The cost of fixing the P2201 code can vary depending on the specific issue causing the fault. It may range from a few hundred dollars for sensor replacement to more significant costs for complex repairs involving the ECM or exhaust system.

9. Can resetting the Check Engine Light resolve the P2201 code temporarily?

- Resetting the Check Engine Light may temporarily turn off the light, but it will not address the underlying issue causing the P2201 code. It is recommended to diagnose and repair the problem to prevent further complications.

10. Is the P2201 Ford code a serious issue that requires immediate attention?

- While the P2201 code may not cause immediate vehicle breakdown, it is essential to address it promptly to prevent potential damage to the engine and ensure optimal performance and fuel efficiency.