P2199 2018 GMC Sierra Code - Intake Air Temperature Sensor 1-2 Not Plausible
Quick Answer
The following sensors are integrated within the Mass Air Flow/Multifunction Intake Air Sensor: IAT sensor 1, IAT sensor 2, Humidity sensor, MAF sensor, and BARO pressure sensor. Common causes include Faulty Intake Air Temperature (IAT) (integrated within Mass Air Flow/Multifunction Intake Air Sensor), Intake Air Temperature harness is open or shorted, Intake Air Temperature circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2199 2018 GMC Sierra indicates Intake Air Temperature Sensor 1-2 Not Plausible.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) (integrated within Mass Air Flow/Multifunction Intake Air Sensor), Intake Air Temperature harness is open or shorted, Intake Air Temperature circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2199 2018 GMC Sierra Description
The Intake Air Temperature (IAT) Sensor is a variable resistor that changes the voltage on the Engine Control Module (ECM) supplied 5 V signal circuit. The signal varies with the inlet air temperature in the sensor bore. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the absolute difference between the IAT sensor 1 and the IAT sensor 2 temperatures is greater than 55°C (99°F) for longer than 5 s.
What are the Possible Causes of the DTC P2199 2018 GMC Sierra?
- Faulty Intake Air Temperature (IAT) (integrated within Mass Air Flow/Multifunction Intake Air Sensor)
- Intake Air Temperature harness is open or shorted
- Intake Air Temperature circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2199 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2199 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2199 2018 GMC Sierra code?
Need more information on how to fix the P2199 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2199 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2199 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P2199 on a 2018 GMC Sierra related to the Intake Air Temperature Sensor 1-2 Not Plausible?
- Common symptoms may include poor engine performance, rough idling, decreased fuel efficiency, and potential issues with acceleration.
2. What could be the possible causes triggering the OBDII code P2199 on a 2018 GMC Sierra indicating Intake Air Temperature Sensor 1-2 Not Plausible?
- The code may be caused by a faulty intake air temperature sensor, wiring issues, a damaged sensor connector, or problems with the engine's air intake system.
3. How can I diagnose the OBDII code P2199 on my 2018 GMC Sierra associated with Intake Air Temperature Sensor 1-2 Not Plausible?
- You can use an OBDII scanner to read the code, visually inspect the intake air temperature sensor and its connections, check for any damaged wiring, and perform a sensor resistance test.
4. Is it safe to continue driving my 2018 GMC Sierra with the OBDII code P2199 showing Intake Air Temperature Sensor 1-2 Not Plausible?
- While the vehicle may still be operable, it is recommended to address the issue promptly to prevent potential long-term damage to the engine and ensure optimal performance.
5. How can I repair the OBDII code P2199 on my 2018 GMC Sierra related to Intake Air Temperature Sensor 1-2 Not Plausible?
- Repair options may include replacing the faulty intake air temperature sensor, repairing damaged wiring or connectors, and clearing the trouble code with an OBDII scanner.
6. Can a dirty air filter cause the OBDII code P2199 to appear on a 2018 GMC Sierra due to Intake Air Temperature Sensor 1-2 Not Plausible?
- Yes, a dirty or clogged air filter can disrupt the airflow and affect the intake air temperature sensor readings, potentially triggering the P2199 trouble code.
7. Are there any preventive maintenance tips to avoid the OBDII code P2199 on a 2018 GMC Sierra linked to Intake Air Temperature Sensor 1-2 Not Plausible?
- Regularly inspect and clean the intake air temperature sensor, check the sensor connections, replace the air filter as recommended, and ensure the air intake system is free from debris.
8. Could extreme weather conditions like extreme cold or heat contribute to triggering the OBDII code P2199 on a 2018 GMC Sierra for Intake Air Temperature Sensor 1-2 Not Plausible?
- Yes, extreme temperature fluctuations can impact the intake air temperature sensor's accuracy and functionality, potentially leading to the code P2199 being triggered.
Discuss the causes and fixes for P2199 2018 GMC Sierra OBDII Code
Code P2199 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
