P2196 2004 TOYOTA COROLLA - Oxygen Air/Fuel Sensor Signal Stuck Rich Bank 1 Sensor 1
When is the code detected?P2196 indicate a malfunction related to bank 1 of the A/F sensor circuit.
P2196 2004 Toyota Corolla DescriptionThe Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio.
The A/F sensor output voltage is used to provide feedback for the Engine Control Module (ECM) to control the air-fuel ratio.
With the A/F sensor output, the ECM can determine deviation from the stoichiometric air-fuel ratio and control proper injection time. If the A/F sensor is malfunctioning, the ECM is unable to accurately control air-fuel ratio.
The A/F sensor is equipped with a heater which heats the zirconia element. The heater is also controlled by the ECM. When the intake air volume is low (the temperature of the exhaust gas is low), current flows to the heater which heats the sensor to facilitate detection of accurate oxygen concentration.
The A/F sensor is a planar type. Compared to a conventional type, the sensor and heater portions are narrower. Because the heat of the heater is conducted through the alumina to zirconia (of the sensor portion), sensor activation is accelerated.
Need more help?Do you need more help with the P2196 2004 Toyota Corolla code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
P2196 2004 TOYOTA COROLLA CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2196 2004 Toyota Corolla code? Have you replaced any parts?
Any information is appreciated. Thanks