AutoCodes – Toyota – P2195 2012 Toyota Corolla

P2195 2012 Toyota Corolla Code - Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1

Quick Answer

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio. Common causes include Faulty Oxygen Air/Fuel Sensor Bank 1 Sensor 1, Oxygen Air/Fuel Sensor Bank 1 Sensor 1 harness is open or shorted, Oxygen Air/Fuel Sensor Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2195 2012 Toyota Corolla indicates Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1.
Common causes
Common causes include Faulty Oxygen Air/Fuel Sensor Bank 1 Sensor 1, Oxygen Air/Fuel Sensor Bank 1 Sensor 1 harness is open or shorted, Oxygen Air/Fuel Sensor Bank 1 Sensor 1 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 7,775
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2195 2012 Toyota Corolla Description

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio.
The A/F sensor output voltage is used to provide feedback for the Engine Control Module (ECM) to control the air-fuel ratio.
With the A/F sensor output, the ECM can determine deviation from the stoichiometric air-fuel ratio and control proper injection time. If the A/F sensor is malfunctioning, the ECM is unable to accurately control air-fuel ratio.
The A/F sensor is equipped with a heater which heats the zirconia element. The heater is also controlled by the ECM. When the intake air volume is low (the temperature of the exhaust gas is low), current flows to the heater which heats the sensor to facilitate detection of accurate oxygen concentration.
The A/F sensor is a planar type. Compared to a conventional type, the sensor and heater portions are narrower. Because the heat of the heater is conducted through the alumina to zirconia (of the sensor portion), sensor activation is accelerated.
OBDII Code P2195 2012 Toyota Corolla - Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1 - AutoCodes.com
P2195 2012 Toyota Corolla Code - Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1

What are the Possible Causes of the DTC P2195 2012 Toyota Corolla?

  • Faulty Oxygen Air/Fuel Sensor Bank 1 Sensor 1
  • Oxygen Air/Fuel Sensor Bank 1 Sensor 1 harness is open or shorted
  • Oxygen Air/Fuel Sensor Bank 1 Sensor 1 circuit poor electrical connection
  • Faulty EFI Relay
  • Faulty Injector
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2195 2012 Toyota Corolla?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2195 2012 Toyota Corolla code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2195 2012 Toyota Corolla code?

Need more information on how to fix the P2195 2012 Toyota Corolla code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2195 2012 Toyota Corolla code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2195 2012 Toyota Corolla Code

1. What are the common symptoms of OBDII code P2195 in a 2012 Toyota Corolla?

- Common symptoms include poor fuel economy, rough idling, engine hesitation, and a possible check engine light illumination.

2. What does the OBDII code P2195 mean for a 2012 Toyota Corolla?

- This code indicates that the oxygen sensor in Bank 1 Sensor 1 is detecting a lean air/fuel mixture consistently.

3. What are the possible causes of OBDII code P2195 in a 2012 Toyota Corolla?

- Common causes include a faulty oxygen sensor, vacuum leaks, fuel system issues, exhaust leaks, or a malfunctioning mass airflow sensor.

4. How can I diagnose the OBDII code P2195 in my 2012 Toyota Corolla?

- Diagnosing this code typically involves checking for vacuum leaks, inspecting the oxygen sensor and its wiring, testing the fuel pressure, and examining the air intake system.

5. How can I repair OBDII code P2195 in my 2012 Toyota Corolla?

- Repairing this code may involve replacing the oxygen sensor, fixing any vacuum leaks, addressing fuel system issues, repairing exhaust leaks, or replacing the mass airflow sensor if necessary.

6. Can I drive my 2012 Toyota Corolla with OBDII code P2195?

- While the vehicle may still be operational with this code, it is recommended to address the underlying issue promptly to prevent potential damage to the engine and ensure optimal performance.

7. How much does it cost to fix OBDII code P2195 in a 2012 Toyota Corolla?

- The cost of fixing this code can vary depending on the specific issue causing it. Costs may include parts such as an oxygen sensor or mass airflow sensor, as well as labor charges for diagnosis and repair.

8. How often should I replace the oxygen sensor in my 2012 Toyota Corolla to prevent OBDII code P2195?

- Oxygen sensors typically have a lifespan of around 60,000 to 90,000 miles. It is recommended to follow the manufacturer's maintenance schedule for sensor replacement to help prevent issues like code P2195.

9. Will resetting the check engine light resolve OBDII code P2195 in my 2012 Toyota Corolla?

- Resetting the check engine light may temporarily turn it off, but it will not fix the underlying issue causing the code. It is important to diagnose and repair the root cause to prevent the code from reoccurring.

10. Can a dirty air filter trigger OBDII code P2195 in a 2012 Toyota Corolla?

- A dirty air filter can affect the air/fuel mixture but is unlikely to directly trigger this specific code. However, maintaining a clean air filter is essential for overall engine performance and efficiency.

Discuss the causes and fixes for P2195 2012 Toyota Corolla OBDII Code

Code P2195 2012 Toyota Corolla comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play