AutoCodes – Toyota – P2195 2011 Toyota Corolla

P2195 2011 Toyota Corolla Code - Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1

Quick Answer

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio. Common causes include Faulty Oxygen Air/Fuel Sensor Bank 1 Sensor 1, Oxygen Air/Fuel Sensor Bank 1 Sensor 1 harness is open or shorted, Oxygen Air/Fuel Sensor Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2195 2011 Toyota Corolla indicates Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1.
Common causes
Common causes include Faulty Oxygen Air/Fuel Sensor Bank 1 Sensor 1, Oxygen Air/Fuel Sensor Bank 1 Sensor 1 harness is open or shorted, Oxygen Air/Fuel Sensor Bank 1 Sensor 1 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,471
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2195 2011 Toyota Corolla Description

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio.
The A/F sensor output voltage is used to provide feedback for the Engine Control Module (ECM) to control the air-fuel ratio.
With the A/F sensor output, the ECM can determine deviation from the stoichiometric air-fuel ratio and control proper injection time. If the A/F sensor is malfunctioning, the ECM is unable to accurately control air-fuel ratio.
The A/F sensor is equipped with a heater which heats the zirconia element. The heater is also controlled by the ECM. When the intake air volume is low (the temperature of the exhaust gas is low), current flows to the heater which heats the sensor to facilitate detection of accurate oxygen concentration.
The A/F sensor is a planar type. Compared to a conventional type, the sensor and heater portions are narrower. Because the heat of the heater is conducted through the alumina to zirconia (of the sensor portion), sensor activation is accelerated.
OBDII Code P2195 2011 Toyota Corolla - Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1 - AutoCodes.com
P2195 2011 Toyota Corolla Code - Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1

What are the Possible Causes of the DTC P2195 2011 Toyota Corolla?

  • Faulty Oxygen Air/Fuel Sensor Bank 1 Sensor 1
  • Oxygen Air/Fuel Sensor Bank 1 Sensor 1 harness is open or shorted
  • Oxygen Air/Fuel Sensor Bank 1 Sensor 1 circuit poor electrical connection
  • Faulty EFI Relay
  • Faulty Injector
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2195 2011 Toyota Corolla?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2195 2011 Toyota Corolla code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2195 2011 Toyota Corolla code?

Need more information on how to fix the P2195 2011 Toyota Corolla code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2195 2011 Toyota Corolla code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2195 2011 Toyota Corolla Code

1. What are the common symptoms of OBDII code P2195 in a 2011 Toyota Corolla?

- Common symptoms include poor fuel economy, rough idling, hesitation during acceleration, and an illuminated check engine light.

2. What does the OBDII code P2195 "Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1" mean for a 2011 Toyota Corolla?

- This code indicates that the oxygen sensor in bank 1, sensor 1 is detecting a lean air/fuel mixture for an extended period, possibly due to a faulty sensor or underlying issue.

3. What are the possible causes of OBDII code P2195 in a 2011 Toyota Corolla?

- Causes can include a faulty oxygen sensor, vacuum leaks, fuel system issues, exhaust leaks, or a problem with the air intake system.

4. How can I diagnose the source of OBDII code P2195 in my 2011 Toyota Corolla?

- Diagnosing this code may involve checking the oxygen sensor readings, inspecting for vacuum leaks, examining the fuel system, and testing the air intake system for any issues.

5. Can driving with OBDII code P2195 in a 2011 Toyota Corolla cause further damage?

- While it's generally safe to drive with this code, prolonged driving with a lean air/fuel mixture can potentially lead to damage to the catalytic converter or other engine components.

6. How can I repair OBDII code P2195 in my 2011 Toyota Corolla?

- Repairing this code often involves replacing the oxygen sensor in bank 1, sensor 1, fixing any vacuum leaks, addressing fuel system issues, or repairing exhaust or air intake system problems.

7. Is it possible to reset the check engine light after fixing OBDII code P2195 in a 2011 Toyota Corolla?

- Yes, once the underlying issue triggering the code is resolved, the check engine light can be reset using an OBDII scanner or by disconnecting the car's battery for a few minutes.

8. How much does it typically cost to repair OBDII code P2195 in a 2011 Toyota Corolla?

- Repair costs can vary depending on the exact cause of the code, but generally, replacing an oxygen sensor or addressing related issues may range from $200 to $500 at a repair shop.

9. Can a DIY enthusiast fix OBDII code P2195 in a 2011 Toyota Corolla?

- Depending on the root cause, some DIY enthusiasts with the necessary tools and skills may be able to address this code by replacing the oxygen sensor or addressing minor issues like vacuum leaks.

10. How often does OBDII code P2195 occur in a 2011 Toyota Corolla?

- While the frequency can vary, this code can occur sporadically or more often in older vehicles with high mileage or if regular maintenance is neglected.

Discuss the causes and fixes for P2195 2011 Toyota Corolla OBDII Code

Code P2195 2011 Toyota Corolla comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play