P2195 2010 TOYOTA CAMRY - Oxygen Air/Fuel Sensor Signal Stuck Lean Bank 1 Sensor 1
When is the code detected?P2195 indicate a malfunction related to bank 1 of the A/F sensor circuit.
P2195 2010 Toyota Camry DescriptionThe Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio.
The A/F sensor output voltage is used to provide feedback for the Engine Control Module (ECM) to control the air-fuel ratio.
With the A/F sensor output, the ECM can determine deviation from the stoichiometric air-fuel ratio and control proper injection time. If the A/F sensor is malfunctioning, the ECM is unable to accurately control air-fuel ratio.
The A/F sensor is equipped with a heater which heats the zirconia element. The heater is also controlled by the ECM. When the intake air volume is low (the temperature of the exhaust gas is low), current flows to the heater which heats the sensor to facilitate detection of accurate oxygen concentration.
The A/F sensor is a planar type. Compared to a conventional type, the sensor and heater portions are narrower. Because the heat of the heater is conducted through the alumina to zirconia (of the sensor portion), sensor activation is accelerated.
Need more help?Get the P2195 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in you area
P2195 2010 TOYOTA CAMRY CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2195 2010 Toyota Camry code? Have you replaced any parts?
Any information is appreciated. Thanks