P2189 Dodge Code - System Too Lean At Idle Bank 2
Quick Answer
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2189 Dodge indicates System Too Lean At Idle Bank 2.
- Common causes
- Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2189 Dodge Description
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).
What are the Possible Causes of the DTC P2189 Dodge?
- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection
How to Fix the DTC P2189 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2189 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2189 Dodge code?
Need more information on how to fix the P2189 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2189 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2189 Dodge Code
1. What does the OBDII code P2189 mean on a Dodge vehicle?
P2189 indicates that the engine control module (ECM) has detected a lean air-fuel mixture on Bank 2 at idle.
2. What are the common symptoms of code P2189 on a Dodge?
Symptoms may include rough idling, engine stalling at idle, reduced fuel efficiency, hesitation during acceleration, and the check engine light turning on.
3. What causes the P2189 code to appear on a Dodge?
Common causes include a vacuum leak, a faulty PCV valve, a leaking intake manifold gasket, a malfunctioning oxygen sensor, clogged fuel injectors, or low fuel pressure.
4. Is it safe to drive with a P2189 code on a Dodge?
While the vehicle may still be drivable, continued operation with this code can lead to poor performance, increased emissions, and potential engine damage over time.
5. How do I diagnose the P2189 code on my Dodge?
Start by checking for vacuum leaks, inspecting the PCV valve, testing the oxygen sensor, verifying fuel pressure, and ensuring the intake manifold gasket is sealing properly.
6. Can a dirty air filter cause the P2189 code on a Dodge?
A severely clogged air filter can affect air intake and contribute to a lean condition, though it is less likely at idle.
7. How do I fix the P2189 code on a Dodge?
Repairs may involve fixing vacuum leaks, replacing the PCV valve, cleaning or replacing fuel injectors, replacing a faulty oxygen sensor, or repairing intake manifold leaks.
8. Will clearing the P2189 code solve the problem?
Clearing the code without addressing the root cause will only temporarily remove the check engine light. The issue must be diagnosed and repaired to prevent the code from returning.
9. Can a bad fuel pump cause the P2189 code on a Dodge?
Yes, a failing fuel pump can result in low fuel pressure, leading to a lean condition and triggering the P2189 code.
10. What tools are needed to troubleshoot the P2189 code on a Dodge?
You’ll need an OBDII scanner, a vacuum gauge, a fuel pressure tester, and potentially a smoke machine to detect intake leaks.
Discuss the causes and fixes for P2189 Dodge OBDII Code
Code P2189 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
