AutoCodesHonda – P2185 2009 Honda Accord

P2185 2009 Honda Accord Code - Engine Coolant Temperature Sensor 2 Circuit High Voltage

Quick Answer

Engine Coolant Temperature (ECT) sensor 2 is a thermistor attached to the radiator. Common causes include Low coolant level, Faulty Engine Coolant Temperature Sensor, Stuck or leaking thermostat. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2185 2009 Honda Accord indicates Engine Coolant Temperature Sensor 2 Circuit High Voltage.
Common causes
Common causes include Low coolant level, Faulty Engine Coolant Temperature Sensor, Stuck or leaking thermostat.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 8,648
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2185 2009 Honda Accord Description

Engine Coolant Temperature (ECT) sensor 2 is a thermistor attached to the radiator. The Powertrain Control Module (PCM) applies voltage (about 5 V) to the ECT2 signal circuit through a pull up resistor. As the engine coolant temperature cools, ECT sensor 2 resistance increases, and the PCM detects a high signal voltage. As the engine coolant warms, the sensor resistance decreases, and the PCM detects a low ECT2 signal voltage. If the ECT sensor 2 output voltage is less than a set value when the engine coolant temperature is high, the PCM detects a malfunction and a DTC is stored.
OBDII Code P2185 2009 Honda Accord - Engine Coolant Temperature Sensor 2 Circuit High Voltage - AutoCodes.com
P2185 2009 Honda Accord Code - Engine Coolant Temperature Sensor 2 Circuit High Voltage

What are the Possible Causes of the DTC P2185 2009 Honda Accord?

  • Low coolant level
  • Faulty Engine Coolant Temperature Sensor
  • Stuck or leaking thermostat
  • Engine Coolant Temperature Sensor harness is open or shorted
  • Engine Coolant Temperature Sensor circuit poor electrical connection

How to Fix the DTC P2185 2009 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2185 2009 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2185 2009 Honda Accord code?

Need more information on how to fix the P2185 2009 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2185 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2185 2009 Honda Accord Code

1. What does the OBDII code P2185 mean on a 2009 Honda Accord?

P2185 indicates a high voltage issue in the Engine Coolant Temperature (ECT) Sensor 2 circuit, which monitors the engine's coolant temperature.

2. What are the symptoms of code P2185 in a 2009 Honda Accord?

Common symptoms include the check engine light turning on, engine overheating, poor fuel economy, and erratic temperature gauge readings.

3. What causes the P2185 code to appear?

Potential causes include a faulty ECT sensor, damaged or corroded wiring, a poor electrical connection, or an issue with the vehicle's PCM (Powertrain Control Module).

4. Can I drive my 2009 Honda Accord with the P2185 code?

While the car may still run, driving with this code can risk engine overheating or performance issues. It's best to address the problem promptly.

5. How do I diagnose a P2185 code on a 2009 Honda Accord?

Start by checking the ECT sensor and its wiring for visible damage or corrosion. Use a multimeter to test sensor resistance and ensure proper voltage supply.

6. How do I fix the P2185 code on a 2009 Honda Accord?

Repairs may include replacing the ECT sensor, repairing damaged wiring, cleaning corroded connectors, or, in rare cases, reprogramming or replacing the PCM.

7. Where is the Engine Coolant Temperature Sensor 2 located on a 2009 Honda Accord?

ECT Sensor 2 is typically located near the radiator or lower coolant hose, depending on the engine configuration.

8. How much does it cost to repair a P2185 code on a 2009 Honda Accord?

The cost can vary, but replacing the ECT sensor typically ranges from $50 to $150, including parts and labor. Wiring repairs may cost more if extensive.

9. Can a P2185 code cause engine damage if left unresolved?

Yes, if the engine overheats due to incorrect temperature readings, it can lead to severe engine damage over time.

10. Will clearing the P2185 code with an OBDII scanner fix the problem?

Clearing the code may turn off the check engine light temporarily, but if the underlying issue isn’t resolved, the code will return.

Discuss the causes and fixes for P2185 2009 Honda Accord OBDII Code

Code P2185 2009 Honda Accord comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play