P216E 2018 GMC Sierra Code - Cylinder 6 Injector High Control Circuit Low Voltage
Quick Answer
The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. Common causes include Faulty Fuel Injector 6, Fuel Injector 6 harness is open or shorted, Fuel Injector 6 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P216E 2018 GMC Sierra indicates Cylinder 6 Injector High Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty Fuel Injector 6, Fuel Injector 6 harness is open or shorted, Fuel Injector 6 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P216E 2018 GMC Sierra Description
What are the Possible Causes of the DTC P216E 2018 GMC Sierra?
- Faulty Fuel Injector 6
- Fuel Injector 6 harness is open or shorted
- Fuel Injector 6 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P216E 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P216E 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P216E 2018 GMC Sierra code?
Need more information on how to fix the P216E 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P216E 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P216E 2018 GMC Sierra Code
1. What are common symptoms of OBDII code P216E in a 2018 GMC Sierra related to the Cylinder 6 Injector High Control Circuit Low Voltage?
- Common symptoms include rough idling, misfiring, poor engine performance, and possible stalling.
2. What are the possible causes of OBDII code P216E in a 2018 GMC Sierra indicating an issue with the Cylinder 6 Injector High Control Circuit Low Voltage?
- Possible causes can be a faulty fuel injector, wiring issues, poor electrical connections, or a defective Engine Control Module (ECM).
3. How can I diagnose the Cylinder 6 Injector High Control Circuit Low Voltage issue in my 2018 GMC Sierra triggering OBDII code P216E?
- You can use a diagnostic scanner to read the code, perform a visual inspection of the injector and wiring, test the injector's resistance, and check for voltage at the injector connector.
4. What are some repair tips for resolving OBDII code P216E in a 2018 GMC Sierra related to the Cylinder 6 Injector High Control Circuit Low Voltage?
- Repair tips include addressing any wiring or connector issues, replacing the faulty fuel injector, ensuring proper ECM function, and clearing the trouble code after repairs.
5. Can driving with OBDII code P216E in a 2018 GMC Sierra indicating Cylinder 6 Injector High Control Circuit Low Voltage cause further damage?
- Continuing to drive with this issue can potentially lead to poor engine performance, decreased fuel efficiency, and further damage to the engine components over time.
6. How urgent is it to address OBDII code P216E in a 2018 GMC Sierra due to the Cylinder 6 Injector High Control Circuit Low Voltage?
- It is advisable to address this issue promptly to prevent potential engine damage, poor performance, and increased fuel consumption.
7. Is it possible to clear OBDII code P216E in a 2018 GMC Sierra related to the Cylinder 6 Injector High Control Circuit Low Voltage without fixing the underlying issue?
- Clearing the code without fixing the underlying problem will likely result in the code reappearing once the ECM detects the issue again during its diagnostic checks.
8. Can a DIY enthusiast fix OBDII code P216E in a 2018 GMC Sierra associated with the Cylinder 6 Injector High Control Circuit Low Voltage?
- Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to address this issue by following repair guides and diagnostic procedures.
9. What is the typical cost to repair OBDII code P216E in a 2018 GMC Sierra due to the Cylinder 6 Injector High Control Circuit Low Voltage?
- The cost of repairing this issue can vary based on the specific problem, parts needed, labor rates, and whether the repair is done at a dealership or an independent mechanic.
10. Is it recommended to seek professional help for diagnosing and repairing OBDII code P216E in a 2018 GMC Sierra related to the Cylinder 6 Injector High Control Circuit Low Voltage?
- Seeking professional help from a qualified mechanic or dealership is advisable for accurate diagnosis, proper repair, and ensuring the issue is resolved correctly.
Discuss the causes and fixes for P216E 2018 GMC Sierra OBDII Code
Code P216E 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
