P216C 2014 GMC Sierra Code - Cylinder 5 Injector High Control Circuit High Voltage
Quick Answer
The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. Common causes include Faulty Fuel Injector 5, Fuel Injector 5 harness is open or shorted, Fuel Injector 5 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P216C 2014 GMC Sierra indicates Cylinder 5 Injector High Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Fuel Injector 5, Fuel Injector 5 harness is open or shorted, Fuel Injector 5 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P216C 2014 GMC Sierra Description
What are the Possible Causes of the DTC P216C 2014 GMC Sierra?
- Faulty Fuel Injector 5
- Fuel Injector 5 harness is open or shorted
- Fuel Injector 5 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P216C 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P216C 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P216C 2014 GMC Sierra code?
Need more information on how to fix the P216C 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P216C 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P216C 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code P216C in a 2014 GMC Sierra related to the Cylinder 5 Injector High Control Circuit High Voltage?
The common symptoms include rough idling, decreased fuel efficiency, misfires in cylinder 5, and potentially a noticeable decrease in engine performance.
2. What are the possible causes of the Cylinder 5 Injector High Control Circuit High Voltage OBDII code on a 2014 GMC Sierra?
Possible causes include a faulty fuel injector in cylinder 5, a wiring issue in the injector circuit, a malfunctioning Engine Control Module (ECM), or an electrical problem in the system.
3. How can I diagnose the issue causing the OBDII code P216C in my 2014 GMC Sierra?
Diagnosing the issue requires using a scan tool to check for the specific code, inspecting the cylinder 5 injector and its wiring for any damage or loose connections, testing the ECM for proper function, and ensuring there are no other electrical issues in the system.
4. Can I continue to drive my 2014 GMC Sierra with the P216C code present?
It is not recommended to continue driving the vehicle with the code active, as it can lead to further damage to the engine and components. It is best to address the issue promptly to avoid more significant problems.
5. How can I repair the Cylinder 5 Injector High Control Circuit High Voltage issue in my 2014 GMC Sierra?
Repairing the issue may involve replacing the fuel injector in cylinder 5, repairing any damaged wiring in the injector circuit, resetting the ECM, or addressing any other electrical faults that may be causing the problem.
6. Is it possible to reset the OBDII code P216C in a 2014 GMC Sierra without fixing the underlying issue?
While you can clear the code with a scan tool, it will likely reappear if the root cause of the problem is not addressed. It is essential to diagnose and fix the issue to prevent the code from coming back.
7. How much does it typically cost to repair the Cylinder 5 Injector High Control Circuit High Voltage problem in a 2014 GMC Sierra?
The cost of repair can vary depending on the exact cause of the issue, but it may involve parts and labor expenses for replacing the fuel injector, repairing wiring, or addressing other underlying problems. It is advisable to consult a mechanic for a precise estimate.
8. Can a DIY enthusiast with basic automotive knowledge fix the P216C code in a 2014 GMC Sierra?
While some individuals may have the skills to address simpler issues like checking wiring connections, fixing the Cylinder 5 Injector High Control Circuit High Voltage problem often requires specialized tools and expertise. It is recommended to seek professional help for proper diagnosis and repair.
9. Will ignoring the OBDII code P216C in my 2014 GMC Sierra cause more severe damage over time?
Ignoring the code can lead to potential engine damage, decreased performance, and worsened fuel efficiency. It is best to address the issue promptly to prevent any further complications.
10. Are there any preventive maintenance steps I can take to avoid encountering the Cylinder 5 Injector High Control Circuit High Voltage issue in my 2014 GMC Sierra?
Regularly servicing the vehicle, using high-quality fuel, and keeping an eye on any changes in engine performance can help catch potential issues early and prevent the occurrence of OBDII codes like P216C.
Discuss the causes and fixes for P216C 2014 GMC Sierra OBDII Code
Code P216C 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
