P2168 Dodge Code - Throttle/Pedal Position Sensor 'F' Maximum Stop Performance
Quick Answer
The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2168 Dodge indicates Throttle/Pedal Position Sensor 'F' Maximum Stop Performance.
- Common causes
- Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2168 Dodge Description
What are the Possible Causes of the DTC P2168 Dodge?
- Faulty Electronic Throttle Control (ETC)
- Electronic Throttle Control (ETC) harness is open or shorted
- Electronic Throttle Control (ETC) Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2168 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2168 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2168 Dodge code?
Need more information on how to fix the P2168 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2168 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2168 Dodge Code
1. What does the OBDII code P2168 mean for a Dodge vehicle?
Code P2168 indicates an issue with the Throttle/Pedal Position Sensor 'F,' specifically related to its maximum stop performance.
2. What are common symptoms of the P2168 code in a Dodge?
Symptoms often include reduced engine power, poor throttle response, difficulty accelerating, and potentially triggering the check engine light.
3. What causes the P2168 code to appear on a Dodge?
Possible causes include a malfunctioning throttle position sensor, wiring issues, connector problems, or a faulty accelerator pedal position sensor.
4. Can I still drive my Dodge with the P2168 code?
While the vehicle may still be drivable, it could experience reduced performance or sudden loss of power, making it unsafe to drive until repaired.
5. How do I diagnose the P2168 code in a Dodge?
Diagnosis typically involves inspecting the throttle position sensor, checking for damaged or corroded wiring, and testing the sensor’s output using a multimeter.
6. What repairs can fix the P2168 code in a Dodge?
Common repairs include replacing the throttle position sensor, fixing or replacing damaged wiring or connectors, and recalibrating the electronic throttle system.
7. Does the P2168 code mean my throttle body needs to be replaced?
Not necessarily. The issue might be with the throttle position sensor or wiring rather than the throttle body itself. Proper diagnosis is essential.
8. How much does it cost to repair a P2168 code on a Dodge?
Repair costs vary but typically range from $150 to $400, depending on whether the throttle position sensor or related components need replacement.
9. Can a dirty throttle body cause the P2168 code on a Dodge?
Yes, a dirty or carbon-clogged throttle body can affect sensor readings and potentially trigger this code.
10. Do I need to clear the P2168 code after fixing the issue?
Yes, after repairs, the code should be cleared using an OBDII scanner to ensure the problem is resolved and the check engine light turns off.
Discuss the causes and fixes for P2168 Dodge OBDII Code
Code P2168 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
