AutoCodes – Dodge – P2151 Dodge

P2151 Dodge Code - Cylinder 2 Injector High Control Circuit High Voltage

Quick Answer

The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. Common causes include Faulty Fuel Injector 2, Fuel Injector 2 harness is open or shorted, Fuel Injector 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2151 Dodge indicates Cylinder 2 Injector High Control Circuit High Voltage.
Common causes
Common causes include Faulty Fuel Injector 2, Fuel Injector 2 harness is open or shorted, Fuel Injector 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,602
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 23, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2151 Dodge Description

The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. The ECM energizes each fuel injector by grounding the low control circuit of the fuel injector. The ECM monitors the status of the fuel injector circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is disabled. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the fuel injector high voltage supply circuit is shorted to voltage for greater than 2 s.
OBDII Code P2151 Dodge - Cylinder 2 Injector High Control Circuit High Voltage - AutoCodes.com
P2151 Dodge Code - Cylinder 2 Injector High Control Circuit High Voltage

What are the Possible Causes of the DTC P2151 Dodge?

  • Faulty Fuel Injector 2
  • Fuel Injector 2 harness is open or shorted
  • Fuel Injector 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2151 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2151 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2151 Dodge code?

Need more information on how to fix the P2151 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2151 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2151 Dodge Code

What does the OBDII code P2151 mean on a Dodge?

P2151 indicates a high voltage issue in the control circuit for the cylinder 2 injector, typically signaling an electrical fault.

What are the common symptoms of code P2151 on a Dodge vehicle?

Symptoms may include poor engine performance, rough idle, misfires, reduced fuel efficiency, and an illuminated check engine light.

What causes the P2151 code on a Dodge?

Common causes include a faulty injector, wiring or connector issues, a short circuit, or a malfunctioning Powertrain Control Module (PCM).

Can I drive my Dodge with the P2151 code active?

Driving with the P2151 code is not recommended as it can lead to engine damage and reduced performance.

How do you diagnose code P2151 on a Dodge?

Diagnosis typically involves inspecting the injector, wiring, connectors, and testing the circuit with a multimeter to identify high voltage or resistance issues.

What repairs can fix the P2151 code on a Dodge?

Repairs may include replacing the cylinder 2 injector, repairing or replacing damaged wiring, cleaning connections, or reprogramming/replacing the PCM.

What tools are needed to fix code P2151 on a Dodge?

Tools may include a multimeter, wiring diagrams, injector testing equipment, and basic hand tools for component replacement.

How much does it cost to repair the P2151 code on a Dodge?

Repair costs can range from $150 to $500, depending on whether the injector, wiring, or PCM needs replacement.

How can I prevent the P2151 code from appearing on a Dodge?

Regular maintenance, inspecting the fuel system, and ensuring wiring and connectors are secure can help prevent this code.

Is the P2151 code specific to Dodge vehicles?

No, P2151 can appear on other vehicles, but its exact meaning and troubleshooting steps may vary by manufacturer.

Discuss the causes and fixes for P2151 Dodge OBDII Code

Code P2151 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play