AutoCodes – Generic – P213B

P213B Code - Exhaust Gas Recirculation Throttle Control Circuit 'B' Range/Performance

Quick Answer

P213B indicates Exhaust Gas Recirculation Throttle Control Circuit 'B' Range/Performance. Common causes for P213B include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P213B indicates Exhaust Gas Recirculation Throttle Control Circuit 'B' Range/Performance.
Common causes: Common causes for P213B include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,721

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P213B Description

OBDII Code P213B - Exhaust Gas Recirculation Throttle Control Circuit 'B' Range/Performance - AutoCodes.com — P213B Code - Exhaust Gas Recirculation Throttle Control Circuit 'B' Range/Performance

How to Fix the DTC P213B?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P213B code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P213B code?

Need more information on how to fix the P213B code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P213B code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P213B Code

1. What are the common symptoms of OBDII code P213B?

- Common symptoms include reduced engine performance, rough idling, stalling, and possibly an illuminated Check Engine Light.

2. What are the possible causes of OBDII code P213B?

- The code P213B can be triggered by issues such as a faulty EGR throttle control sensor, wiring problems, a malfunctioning EGR valve, or a problem with the EGR system.

3. How can I diagnose the cause of OBDII code P213B?

- Diagnosing the code typically involves using a diagnostic scanner to retrieve the trouble codes, checking the EGR throttle control sensor and wiring for faults, and performing a thorough inspection of the EGR system components.

4. Can I drive my vehicle with OBDII code P213B?

- It is not recommended to drive your vehicle with code P213B as it can lead to further damage and potentially unsafe driving conditions. It is best to address the issue promptly.

5. How can I repair OBDII code P213B?

- Repairing code P213B involves addressing the root cause of the issue, which may include replacing a faulty EGR throttle control sensor, repairing damaged wiring, cleaning or replacing the EGR valve, or fixing any other related component.

6. Can a dirty EGR valve cause OBDII code P213B?

- Yes, a dirty or clogged EGR valve can cause insufficient flow through the EGR system, which may trigger code P213B. Regular maintenance and cleaning of the EGR valve can help prevent this issue.

7. Will resetting the Check Engine Light resolve OBDII code P213B?

- Simply resetting the Check Engine Light will not fix the underlying issue causing code P213B. It is important to diagnose and repair the root cause of the problem to prevent the code from reoccurring.

8. Are there any DIY tips for addressing OBDII code P213B?

- DIY tips for addressing code P213B may include checking and cleaning the EGR valve, inspecting the wiring for damage, and ensuring all connections are secure before seeking professional help if needed.

9. What role does the EGR system play in triggering OBDII code P213B?

- The EGR system's function is to reduce nitrogen oxide emissions by recirculating a portion of the exhaust gases back into the combustion chamber. Issues within this system, such as a faulty component or sensor, can lead to the triggering of code P213B.

10. Can a bad EGR throttle control sensor cause OBDII code P213B?

- Yes, a malfunctioning EGR throttle control sensor can cause code P213B by failing to accurately regulate the EGR system's operation, leading to performance issues and triggering the fault code.