P2135 Suzuki Code - Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation
Quick Answer
Electric throttle control actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty electric throttle control actuator (TP sensor 1 and 2), Throttle Position Sensor harness is open or shorted, Throttle Position Sensor circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 Suzuki indicates Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation.
- Common causes
- Common causes include Faulty electric throttle control actuator (TP sensor 1 and 2), Throttle Position Sensor harness is open or shorted, Throttle Position Sensor circuit poor connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2135 Suzuki Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P2135 Suzuki?
- Faulty electric throttle control actuator (TP sensor 1 and 2)
- Throttle Position Sensor harness is open or shorted
- Throttle Position Sensor circuit poor connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P2135 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2135 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2135 Suzuki code?
Need more information on how to fix the P2135 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 Suzuki Code
1. What are the common symptoms of OBDII code P2135 in a Suzuki related to the Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation?
Symptoms may include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What are the possible causes of OBDII code P2135 in a Suzuki?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors, issues with the pedal position sensor, or a problem with the electronic throttle control system.
3. How can I diagnose the cause of OBDII code P2135 in my Suzuki?
Diagnosis typically involves using a scan tool to check for the code, inspecting the throttle position sensor and pedal position sensor, testing the wiring and connectors, and conducting a thorough visual inspection.
4. Can I still drive my Suzuki with OBDII code P2135 present?
It is not recommended to drive your Suzuki with this code present, as it can cause unsafe driving conditions and may lead to further damage to the vehicle.
5. How can I repair OBDII code P2135 in my Suzuki?
Repair options may include replacing the throttle position sensor, repairing any damaged wiring or connectors, recalibrating the sensors, or seeking professional help for a comprehensive diagnosis and repair.
6. Are there any DIY tips for fixing OBDII code P2135 in a Suzuki?
While some basic inspections and sensor replacements can be done by DIY enthusiasts, it is recommended to consult a professional mechanic for a thorough diagnosis and proper repair of this code.
7. Is it safe to reset the OBDII code P2135 in my Suzuki without fixing the underlying issue?
Resetting the code without addressing the root cause can lead to recurring problems and potential safety hazards while driving. It is best to resolve the issue causing the code before resetting it.
8. How much does it typically cost to repair OBDII code P2135 in a Suzuki?
The cost of repair can vary depending on the exact cause of the code, parts needed for replacement, labor costs, and whether the repair is done at a dealership or an independent mechanic.
9. Will OBDII code P2135 cause permanent damage to my Suzuki if left unresolved?
Continued driving with this code present can potentially cause further damage to the engine or other components, so it is advisable to address the issue promptly to avoid more extensive repairs in the future.
Discuss the causes and fixes for P2135 Suzuki OBDII Code
Code P2135 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
