P2135 2011 Nissan Rogue Code - Throttle Position Sensor Circuit Range/Performance
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2011 Nissan Rogue indicates Throttle Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2135 2011 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P2135 2011 Nissan Rogue?
- Faulty Electric Throttle Control Actuator (TP sensor 1 and 2)
- Electric Throttle Control Actuator harness is open or shorted
- Electric Throttle Control Actuator circuit poor connection
- Faulty Accelerator Pedal Position Sensor
How to Fix the DTC P2135 2011 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2135 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2135 2011 Nissan Rogue code?
Need more information on how to fix the P2135 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2011 Nissan Rogue Code
1. What does the OBDII code P2135 on my 2011 Nissan Rogue indicate?
The P2135 code points to a Throttle Position Sensor Circuit Range/Performance issue.
2. What are the common symptoms of a P2135 code in a Nissan Rogue?
Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
3. What are the possible causes of the P2135 code in a 2011 Nissan Rogue?
Common causes of the P2135 code include a faulty throttle position sensor, issues with the throttle body, wiring or connector problems, or a damaged accelerator pedal position sensor.
4. How can I diagnose the P2135 code in my Nissan Rogue?
Diagnosing the P2135 code involves checking the throttle position sensor's voltage, inspecting the wiring and connectors for damage, and scanning for any other related trouble codes.
5. Can I still drive my Nissan Rogue with a P2135 code?
It is not recommended to drive your vehicle with a P2135 code, as it can lead to unsafe driving conditions and potential further damage to the engine.
6. How can I repair a P2135 code on my 2011 Nissan Rogue?
Repairing a P2135 code may involve replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, cleaning the throttle body, or resetting the throttle position sensor.
7. Is it necessary to reset the ECU after fixing a P2135 code on a Nissan Rogue?
Yes, it is recommended to reset the ECU after fixing a P2135 code to clear any stored error codes and ensure the system recalibrates properly.
8. Can a dirty throttle body cause a P2135 code in a Nissan Rogue?
Yes, a dirty throttle body can disrupt the airflow and cause erratic sensor readings, potentially triggering a P2135 code.
9. How much does it typically cost to repair a P2135 code on a 2011 Nissan Rogue?
The cost of repairing a P2135 code can vary depending on the specific issue, but it may range from $100 to $500, including parts and labor.
10. How long does it take to repair a P2135 code on a Nissan Rogue?
The repair time for a P2135 code can vary based on the exact cause, but it typically takes around 1 to 2 hours for a professional mechanic to diagnose and fix the issue.
Discuss the causes and fixes for P2135 2011 Nissan Rogue OBDII Code
Code P2135 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
