P2135 2008 TOYOTA PRIUS - Throttle/Pedal Position Sensor/Switch 'A'/'B' Voltage Correlation
- Faulty electric throttle control actuator (TP sensor 1 and 2)
- Throttle Position Sensor harness is open or shorted
- Throttle Position Sensor circuit poor connection
- Faulty accelerator pedal position sensor
- Engine Light ON (or Service Engine Soon Warning Light)
P2135 2008 Toyota Prius DescriptionElectric throttle control actuator consists of throttle control motor, throttle position sensor, etc. The throttle position sensor responds to the throttle valve movement.
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
Need more help?Get the P2135 2008 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
P2135 2008 TOYOTA PRIUS CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2135 2008 Toyota Prius code? Have you replaced any parts?
Any information is appreciated. Thanks