P2135 2008 Nissan Maxima Code - Throttle Position Sensor Circuit Range/Performance
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2135 2008 Nissan Maxima indicates Throttle Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Electric Throttle Control Actuator (TP sensor 1 and 2), Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2135 2008 Nissan Maxima Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P2135 2008 Nissan Maxima?
- Faulty Electric Throttle Control Actuator (TP sensor 1 and 2)
- Electric Throttle Control Actuator harness is open or shorted
- Electric Throttle Control Actuator circuit poor connection
- Faulty Accelerator Pedal Position Sensor
How to Fix the DTC P2135 2008 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2135 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2135 2008 Nissan Maxima code?
Need more information on how to fix the P2135 2008 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2135 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2135 2008 Nissan Maxima Code
1. What does the OBDII code P2135 on a 2008 Nissan Maxima mean?
The code P2135 indicates a potential issue with the Throttle Position Sensor Circuit Range/Performance.
2. What are the common symptoms of a P2135 code on a 2008 Nissan Maxima?
Common symptoms include reduced engine power, hesitation or jerking during acceleration, and the vehicle going into limp mode.
3. What are the possible causes of a P2135 code on a 2008 Nissan Maxima?
Possible causes include a faulty throttle position sensor, a damaged wiring harness, poor electrical connections, or a problem with the throttle body.
4. How can I diagnose a P2135 code on my 2008 Nissan Maxima?
Diagnosis typically involves checking the throttle position sensor's voltage readings, inspecting the wiring for any damage, and testing the throttle body for proper operation.
5. How can I repair a P2135 code on a 2008 Nissan Maxima?
Repair may involve replacing the throttle position sensor, repairing or replacing any damaged wiring, cleaning the throttle body, or resetting the throttle position sensor.
6. Can I drive my 2008 Nissan Maxima with a P2135 code?
It is not recommended to drive the vehicle with a P2135 code as it can lead to further damage and unsafe driving conditions.
7. How much does it cost to fix a P2135 code on a 2008 Nissan Maxima?
The cost of repair can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
8. Will resetting the OBDII code P2135 on my 2008 Nissan Maxima make it go away permanently?
Resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to return.
9. Is it possible to prevent the OBDII code P2135 from appearing on my 2008 Nissan Maxima?
Regular maintenance, such as cleaning the throttle body and inspecting the wiring harness, can help prevent issues that lead to the P2135 code.
10. Can a DIY enthusiast fix a P2135 code on a 2008 Nissan Maxima?
Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair a P2135 code, especially if the issue is related to simple maintenance tasks like cleaning or replacing a sensor.
Discuss the causes and fixes for P2135 2008 Nissan Maxima OBDII Code
Code P2135 2008 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
