P2134 Dodge Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Intermittent
Quick Answer
The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2134 Dodge indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit Intermittent.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2134 Dodge Description
What are the Possible Causes of the DTC P2134 Dodge?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2134 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2134 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2134 Dodge code?
Need more information on how to fix the P2134 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2134 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2134 Dodge Code
1. What does Dodge OBDII code P2134 mean?
P2134 indicates an intermittent issue with the Throttle/Pedal Position Sensor/Switch 'F' circuit, which can affect throttle control.
2. What are the symptoms of code P2134 in a Dodge vehicle?
Symptoms may include reduced engine performance, erratic throttle response, activation of "limp mode," and the check engine light turning on.
3. What causes the P2134 code in Dodge vehicles?
Common causes include faulty throttle or pedal position sensors, damaged wiring or connectors, and issues with the throttle body or PCM.
4. Can I drive with code P2134 active in my Dodge?
Driving with P2134 is not recommended as it may lead to reduced engine power or unpredictable throttle behavior, posing safety risks.
5. How do you diagnose P2134 in a Dodge vehicle?
Diagnosis involves scanning for codes, inspecting the throttle and pedal position sensors, checking wiring and connectors, and testing sensor voltages.
6. How do I fix the P2134 code on my Dodge?
Repairs may include replacing the faulty sensor, fixing damaged wiring, cleaning or replacing the throttle body, or updating the PCM software.
7. Is P2134 a common issue in Dodge vehicles?
While not extremely common, P2134 can occur in Dodge models with electronic throttle control systems.
8. How much does it cost to repair the P2134 code in a Dodge?
Costs vary but typically range from $150 to $400, depending on whether sensors, wiring, or throttle body components need replacement.
9. Can a dirty throttle body cause P2134 in a Dodge?
Yes, buildup in the throttle body can affect sensor readings and cause intermittent issues triggering the P2134 code.
10. Does the P2134 code require PCM replacement in Dodge vehicles?
PCM replacement is rare for this code but may be necessary if the PCM fails to process the sensor signals correctly after all other fixes.
Discuss the causes and fixes for P2134 Dodge OBDII Code
Code P2134 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
