AutoCodes – Dodge – P2133 Dodge

P2133 Dodge Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit High

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2133 Dodge indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit High.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,036

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2133 Dodge Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy.

OBDII Code P2133 Dodge - Throttle/Pedal Position Sensor/Switch 'F' Circuit High - AutoCodes.com — P2133 Dodge Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit High

What does this mean?

What are the Possible Causes of the DTC P2133 Dodge?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2133 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2133 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2133 Dodge code?

Need more information on how to fix the P2133 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2133 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2133 Dodge Code

1. What are the common symptoms of OBDII code P2133 in a Dodge vehicle?

- Common symptoms of P2133 include loss of power, hesitation or stalling when accelerating, and the vehicle going into limp mode.

2. What does the OBDII code P2133 for Dodge mean?

- The code P2133 indicates an issue with the Throttle/Pedal Position Sensor/Switch 'F' Circuit High, specifically related to a high voltage signal.

3. What are the possible causes of OBDII code P2133 in a Dodge?

- The most common causes of P2133 include a faulty throttle position sensor, a malfunctioning pedal position sensor, wiring issues, or a problem with the electronic throttle control system.

4. How can I diagnose the OBDII code P2133 in my Dodge?

- To diagnose P2133, you can use an OBDII scanner to retrieve the code and then inspect the throttle position sensor, pedal position sensor, and related wiring for any visible damage or irregularities.

5. Can I continue driving my Dodge with the OBDII code P2133?

- It is not recommended to drive your Dodge with the P2133 code present, as it can lead to unsafe driving conditions and potential further damage to the vehicle's components.

6. How can I repair OBDII code P2133 in my Dodge?

- Repairing P2133 may involve replacing the throttle position sensor, pedal position sensor, or repairing any damaged wiring or connections. It is recommended to consult a professional mechanic for accurate diagnosis and repair.

7. Can a dirty throttle body cause the OBDII code P2133 in a Dodge?

- Yes, a dirty or malfunctioning throttle body can sometimes trigger the P2133 code by causing irregular signals from the throttle position sensor.

8. Is OBDII code P2133 a common issue in Dodge vehicles?

- P2133 is not uncommon in Dodge vehicles, especially in models with electronic throttle control systems. Regular maintenance and inspection can help prevent this issue.

9. How much does it cost to fix OBDII code P2133 in a Dodge?

- The cost of fixing P2133 can vary depending on the exact cause of the issue, but it may range from $200 to $500 for parts and labor.

10. Can I reset the OBDII code P2133 in my Dodge by disconnecting the battery?

- While disconnecting the battery may temporarily clear the code, it is not a recommended method for fixing the underlying issue causing P2133. It is best to address the root cause of the problem to prevent it from recurring.