AutoCodes – Ford – P2133 2008 Ford Fusion

P2133 2008 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit High

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2133 2008 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit High.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,602

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2133 2008 Ford Fusion Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The accelerator pedal position (APP) sensor 3 is out of self-test range high.

OBDII Code P2133 2008 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'F' Circuit High - AutoCodes.com — P2133 2008 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit High

What does this mean?

What are the Possible Causes of the DTC P2133 2008 Ford Fusion?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2133 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2133 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2133 2008 Ford Fusion code?

Need more information on how to fix the P2133 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2133 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2133 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P2133 on a 2008 Ford Fusion?

- Common symptoms include reduced engine power, stalling, rough idle, and illuminated check engine light.

2. What does the OBDII code P2133 indicate for a 2008 Ford Fusion?

- The code P2133 indicates an issue with the Throttle/Pedal Position Sensor/Switch 'F' Circuit High.

3. What are the possible causes of OBDII code P2133 on a 2008 Ford Fusion?

- Possible causes include a faulty throttle position sensor, pedal position sensor, wiring issues, or a problem with the throttle body.

4. How can I diagnose the cause of OBDII code P2133 on my 2008 Ford Fusion?

- Diagnose the code by checking the throttle position sensor and pedal position sensor readings using a scan tool, inspecting the wiring for damage, and ensuring proper voltage supply.

5. Can I still drive my 2008 Ford Fusion with OBDII code P2133?

- It is not recommended to drive the vehicle with code P2133 as it can lead to unsafe driving conditions and potential further damage to the engine.

6. How can I repair OBDII code P2133 on my 2008 Ford Fusion?

- Repair options include replacing the throttle position sensor, pedal position sensor, repairing damaged wiring, or cleaning the throttle body.

7. Is it possible to reset OBDII code P2133 on a 2008 Ford Fusion by disconnecting the battery?

- Disconnecting the battery may temporarily clear the code, but it is essential to diagnose and repair the underlying issue to prevent the code from reoccurring.

8. How much does it typically cost to repair OBDII code P2133 on a 2008 Ford Fusion?

- The cost of repairing code P2133 can vary depending on the exact cause, but it may range from $100 to $300 for parts and labor.

9. Can a DIY enthusiast fix OBDII code P2133 on a 2008 Ford Fusion?

- While some may be able to diagnose and replace components like the throttle position sensor, it is recommended to consult a professional for accurate diagnosis and repair to ensure proper functioning.

10. How long does it take to repair OBDII code P2133 on a 2008 Ford Fusion?

- The repair time for code P2133 can vary depending on the cause and complexity of the issue, but it typically takes a few hours to complete the repair.