AutoCodes – Dodge – P2132 Dodge

P2132 Dodge Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2132 Dodge indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,644

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2132 Dodge Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy.

OBDII Code P2132 Dodge - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low - AutoCodes.com — P2132 Dodge Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2132 Dodge?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2132 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2132 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2132 Dodge code?

Need more information on how to fix the P2132 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2132 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2132 Dodge Code

What does the OBDII code P2132 mean on a Dodge vehicle?

1. P2132 indicates a low voltage issue in the Throttle/Pedal Position Sensor/Switch 'F' circuit, which helps the vehicle’s computer monitor and control throttle position. 2.

What are the common symptoms of a P2132 code in a Dodge?

Symptoms may include reduced engine power, poor acceleration, the throttle not responding properly, and the Check Engine Light being illuminated. 3.

What causes the P2132 code to appear in a Dodge?

Possible causes include a faulty throttle/pedal position sensor, damaged wiring or connections in the circuit, or a malfunctioning engine control module (ECM). 4.

Can I drive my Dodge with a P2132 code?

Driving with a P2132 code is not recommended, as it may cause reduced engine performance and potentially lead to unsafe driving conditions. 5.

How do I diagnose the P2132 code on my Dodge?

Diagnosis involves checking the throttle/pedal position sensor, inspecting wiring and connectors for damage, and testing the circuit voltage with a multimeter. 6.

How can I fix a P2132 code in my Dodge?

Repairs may include replacing a faulty throttle/pedal position sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary. 7.

How much does it cost to repair a P2132 code on a Dodge?

Repair costs can vary, but replacing a throttle/pedal position sensor may cost $100-$300, while wiring repairs or ECM replacement can be more expensive depending on labor and parts. 8.

Can a dirty throttle body cause a P2132 code in a Dodge?

While a dirty throttle body is not a direct cause of P2132, it can exacerbate throttle-related issues. Cleaning the throttle body may help if it’s contributing to poor performance. 9.

Will disconnecting the battery clear the P2132 code on a Dodge?

Disconnecting the battery may temporarily clear the code, but it will not fix the underlying issue. Proper diagnosis and repair are needed to resolve the problem. 10.

Could a bad accelerator pedal position sensor trigger a P2132 code in a Dodge?

Yes, a faulty accelerator pedal position sensor can cause the P2132 code, as it’s part of the circuit that monitors voltage related to throttle control.