P2132 2009 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low
Quick Answer
The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2132 2009 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit Low.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2132 2009 Ford Fusion Description
What are the Possible Causes of the DTC P2132 2009 Ford Fusion?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2132 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2132 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2132 2009 Ford Fusion code?
Need more information on how to fix the P2132 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2132 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2132 2009 Ford Fusion Code
1. What does the OBDII code P2132 mean on a 2009 Ford Fusion?
P2132 indicates a problem with the Throttle/Pedal Position Sensor/Switch "F" Circuit reporting a voltage that is lower than the expected range.
2. What are the common symptoms of code P2132 in a 2009 Ford Fusion?
Symptoms may include a lack of throttle response, reduced engine power, hesitation during acceleration, the check engine light being illuminated, or the vehicle entering "limp mode."
3. What causes the P2132 code in a 2009 Ford Fusion?
Potential causes include a faulty throttle/pedal position sensor, damaged or corroded wiring, a malfunctioning throttle body, or a bad connection in the circuit.
4. Can I drive my 2009 Ford Fusion with a P2132 code?
It’s not recommended to drive for extended periods with this code, as it could lead to unsafe driving conditions due to reduced power or throttle response.
5. How do I diagnose the P2132 code in my 2009 Ford Fusion?
Start by inspecting the wiring and connectors for damage or corrosion. Use a multimeter to check voltage at the throttle/pedal position sensor. If everything appears normal, the sensor itself or the throttle body may need further testing.
6. How do I fix the P2132 code on a 2009 Ford Fusion?
Repairs may include replacing the throttle/pedal position sensor, repairing damaged wiring, cleaning or replacing the throttle body, or fixing any poor electrical connections in the circuit.
7. How much does it cost to repair the P2132 code?
Costs vary depending on the issue. Replacing a throttle position sensor may cost $100-$300, while wiring repairs or throttle body replacement could cost more, depending on labor rates.
8. Is the P2132 code related to the throttle body or the gas pedal?
Yes, P2132 is directly related to the throttle/pedal position sensor, which could involve the throttle body or the gas pedal assembly, depending on where the sensor is located.
9. Can a dirty throttle body cause the P2132 code in a 2009 Ford Fusion?
Yes, a dirty or stuck throttle body can cause improper sensor readings, leading to the P2132 code.
10. Will resetting the check engine light fix the P2132 code?
Resetting the light may temporarily clear the code, but if the underlying issue isn’t resolved, the code and symptoms will return.
Discuss the causes and fixes for P2132 2009 Ford Fusion OBDII Code
Code P2132 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
