AutoCodes – Ford – P2132 2007 Ford Fusion

P2132 2007 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2132 2007 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,013

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2132 2007 Ford Fusion Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The accelerator pedal position (APP) sensor 3 is out of self-test range low.

OBDII Code P2132 2007 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low - AutoCodes.com — P2132 2007 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2132 2007 Ford Fusion?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2132 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2132 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2132 2007 Ford Fusion code?

Need more information on how to fix the P2132 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2132 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2132 2007 Ford Fusion Code

1. What are the common symptoms of OBDII code P2132 on a 2007 Ford Fusion?

The common symptoms of OBDII code P2132 on a 2007 Ford Fusion include reduced engine power, hesitation or stalling when accelerating, and illuminated Check Engine Light.

2. What does the Throttle/Pedal Position Sensor/Switch 'F' Circuit Low mean in relation to code P2132 on a 2007 Ford Fusion?

The code P2132 indicates a low voltage condition in the circuit related to the throttle/pedal position sensor or switch 'F' on a 2007 Ford Fusion.

3. What are the possible causes of OBDII code P2132 on a 2007 Ford Fusion?

Possible causes of OBDII code P2132 on a 2007 Ford Fusion include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning pedal position sensor, or issues with the throttle body.

4. How can I diagnose the cause of OBDII code P2132 on my 2007 Ford Fusion?

To diagnose the cause of OBDII code P2132 on a 2007 Ford Fusion, you can perform a visual inspection of the wiring and connectors, test the throttle position sensor's voltage, check the pedal position sensor, and inspect the throttle body for any issues.

5. Can I continue driving my 2007 Ford Fusion with OBDII code P2132?

It is not recommended to continue driving your 2007 Ford Fusion with OBDII code P2132, as it can lead to further damage or safety issues. It's best to address the underlying problem promptly.

6. How can I repair OBDII code P2132 on a 2007 Ford Fusion?

Repairing OBDII code P2132 on a 2007 Ford Fusion may involve replacing the faulty throttle position sensor, repairing damaged wiring or connectors, adjusting the pedal position sensor, or cleaning/replacing the throttle body.

7. Can a DIY enthusiast fix OBDII code P2132 on a 2007 Ford Fusion?

A DIY enthusiast may be able to fix OBDII code P2132 on a 2007 Ford Fusion if they have the necessary tools, knowledge, and skills to diagnose and repair the issue correctly. Otherwise, it is advisable to seek professional help.

8. How much does it cost to repair OBDII code P2132 on a 2007 Ford Fusion?

The cost of repairing OBDII code P2132 on a 2007 Ford Fusion can vary depending on the underlying cause, parts needed, and labor costs. It's recommended to obtain quotes from different mechanics or repair shops.

9. Will resetting the OBDII code P2132 on a 2007 Ford Fusion make it go away permanently?

Resetting the OBDII code P2132 on a 2007 Ford Fusion may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It's essential to diagnose and fix the root cause of the problem.

10. How long does it take to repair OBDII code P2132 on a 2007 Ford Fusion?

The time it takes to repair OBDII code P2132 on a 2007 Ford Fusion can vary depending on the specific cause of the issue and the complexity of the repair. It's best to consult with a mechanic for an accurate estimate of the repair time.