AutoCodes – Ford – P2132 2006 Ford Fusion

P2132 2006 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2132 2006 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'F' Circuit Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,104

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2132 2006 Ford Fusion Description

The Accelerator Pedal Position (APP) sensor is an input to the Powertrain Control Module (PCM) and used to determine the amount of torque requested by the operator. There are 2 pedal position signals in the sensor. Both signals, APP and APP2, have a positive slope (increasing angle, increasing voltage), but are offset and increase at different rates. The 2 pedal position signals make sure the PCM receives a correct input even if 1 signal has a concern. The PCM determines if a signal is incorrect by calculating where it should be, inferred from the other signals. If a concern is present with one of the circuits the other input is used. There are 2 reference voltage circuits, 2 signal return circuits, and 2 signal circuits (a total of 6 circuits and pins) between the PCM and the APP sensor assembly. The pedal position signal is converted to pedal travel degrees (rotary angle) by the PCM. The software converts these degrees to counts, which is the input to the torque based strategy. The accelerator pedal position (APP) sensor 3 is out of self-test range low.

OBDII Code P2132 2006 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low - AutoCodes.com — P2132 2006 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'F' Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2132 2006 Ford Fusion?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2132 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2132 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2132 2006 Ford Fusion code?

Need more information on how to fix the P2132 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2132 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2132 2006 Ford Fusion Code

1. What does the OBDII code P2132 mean on a 2006 Ford Fusion?

P2132 indicates a "Throttle/Pedal Position Sensor/Switch 'F' Circuit Low," meaning the PCM has detected a low voltage signal from the throttle or pedal position sensor circuit.

2. What are the common symptoms of code P2132 on a 2006 Ford Fusion?

Symptoms include reduced engine performance, throttle hesitation, poor acceleration, erratic idle, and in some cases, the vehicle entering "limp mode."

3. What causes the P2132 code to appear on a 2006 Ford Fusion?

Common causes include a faulty throttle position sensor, damaged or corroded wiring, a bad pedal position sensor, or a malfunctioning PCM.

4. How do I diagnose the P2132 code on my 2006 Ford Fusion?

Start by inspecting the throttle position sensor (TPS) and pedal position sensor (PPS) wiring for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.

5. Can I drive my 2006 Ford Fusion with the P2132 code?

Itâ€™s not recommended to drive with this code active, as it can lead to unpredictable throttle response and reduced engine performance, potentially causing unsafe driving conditions.

6. How do I fix the P2132 code on my 2006 Ford Fusion?

Repairs may include replacing the throttle position sensor, repairing or replacing damaged wiring, or recalibrating/replacing the PCM if necessary.

7. How much does it cost to repair the P2132 code on a 2006 Ford Fusion?

Repair costs vary. A throttle position sensor replacement typically costs $150â€“$300, while wiring repairs or PCM replacement may be more expensive depending on labor rates.

8. Can a dirty throttle body cause the P2132 code?

A dirty throttle body is unlikely to directly cause P2132, but it may contribute to related throttle issues. Cleaning the throttle body can sometimes help improve overall performance.

9. What tools do I need to fix the P2132 code on my 2006 Ford Fusion?

Youâ€™ll need a diagnostic scanner, a multimeter, and basic hand tools for inspecting and replacing sensors or repairing wiring.

10. Will disconnecting the battery clear the P2132 code on my 2006 Ford Fusion?

Disconnecting the battery may temporarily clear the code, but if the underlying issue isnâ€™t resolved, the code will likely return. Proper diagnosis and repair are necessary.