AutoCodes – Nissan – P2128 2013 Nissan Rogue

P2128 2013 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2128 2013 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,328

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2128 2013 Nissan Rogue Description

The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into an output voltage and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2128 2013 Nissan Rogue - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2128 2013 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2128 2013 Nissan Rogue?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor harness is open or shorted
Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)
Electric Throttle Control Actuator(Throttle Body)

How to Fix the DTC P2128 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2128 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2128 2013 Nissan Rogue code?

Need more information on how to fix the P2128 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2128 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2128 2013 Nissan Rogue Code

1. What does OBDII code P2128 on a 2013 Nissan Rogue indicate?

The code P2128 relates to an issue with the Accelerator Pedal Position Sensor Circuit in the vehicle.

2. What are the common symptoms of a P2128 trouble code in a Nissan Rogue?

Common symptoms include reduced engine power, unresponsive acceleration, and the vehicle going into limp mode.

3. What are the possible causes of the P2128 code in a 2013 Nissan Rogue?

Potential causes include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.

4. How can I diagnose the P2128 code on my Nissan Rogue?

Diagnosing the P2128 code typically involves using an OBDII scanner to retrieve the code and then inspecting the accelerator pedal position sensor, wiring, and connectors for any visible damage.

5. Can I drive my Nissan Rogue with the P2128 trouble code?

It is not recommended to drive the vehicle with the P2128 code present, as it can lead to unsafe driving conditions and potential further damage to the vehicle.

6. How can I repair the P2128 code on my 2013 Nissan Rogue?

Repairing the P2128 code may involve replacing the accelerator pedal position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module.

7. Is the P2128 code in a Nissan Rogue a common issue?

The P2128 code related to the accelerator pedal position sensor circuit is a known issue in some Nissan Rogue vehicles, especially in models from certain years.

8. Can a DIY enthusiast fix the P2128 code on a Nissan Rogue?

Depending on their skill level and experience, a DIY enthusiast may be able to diagnose and repair the P2128 code, but it is recommended to seek professional help for accurate diagnosis and repair.

9. How much does it typically cost to repair the P2128 code on a Nissan Rogue?

The cost of repairing the P2128 code can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. How long does it take to repair the P2128 code on a Nissan Rogue?

The repair time for the P2128 code can vary based on the extent of the issue and the availability of parts, but it may take a few hours to a full day to complete the repair.