P2128 2011 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit
Quick Answer
The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2128 2011 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2128 2011 Nissan Rogue Description
What are the Possible Causes of the DTC P2128 2011 Nissan Rogue?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
- Electric Throttle Control Actuator(Throttle Body)
How to Fix the DTC P2128 2011 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2128 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2128 2011 Nissan Rogue code?
Need more information on how to fix the P2128 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2128 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2128 2011 Nissan Rogue Code
1. What does OBDII code P2128 mean on a 2011 Nissan Rogue?
P2128 indicates a problem with the Accelerator Pedal Position Sensor Circuit, specifically a high voltage condition in sensor circuit 2.
2. What are the common symptoms of a P2128 code on a 2011 Nissan Rogue?
Symptoms may include poor throttle response, reduced engine power, the vehicle entering limp mode, or the check engine light being illuminated.
3. What causes the P2128 code to appear on a 2011 Nissan Rogue?
Common causes include a faulty accelerator pedal position sensor, damaged or corroded wiring, a loose connection, or a failing engine control module (ECM).
4. Can I drive my 2011 Nissan Rogue with a P2128 code?
While the vehicle may still run, driving with a P2128 code is not recommended due to potential safety concerns like reduced throttle response and limited power.
5. How do I diagnose the P2128 code on my 2011 Nissan Rogue?
Start by inspecting the accelerator pedal position sensor, checking for loose connections or damaged wires. Use a multimeter to test sensor voltages and scan for related trouble codes.
6. How do I fix the P2128 code on a 2011 Nissan Rogue?
Repairs may involve replacing the accelerator pedal position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to fix a P2128 code on a 2011 Nissan Rogue?
The repair cost varies, but replacing the accelerator pedal position sensor typically costs $100–$300, depending on parts and labor.
8. Can a dirty throttle body cause a P2128 code on a 2011 Nissan Rogue?
A dirty throttle body is unlikely to directly cause this code, but inspecting and cleaning the throttle body can help rule out other related performance issues.
9. Does a P2128 code always mean the accelerator pedal position sensor is bad?
No, the issue could also stem from wiring problems, a bad connection, or a faulty ECM.
10. Will clearing the P2128 code with a scan tool fix the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P2128 2011 Nissan Rogue OBDII Code
Code P2128 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
