P2128 2009 NISSAN SENTRA - Accelerator Pedal Position Sensor Circuit
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
- Electric Throttle Control Actuator(Throttle Body)
When is the code detected?An excessively low voltage from the APP sensor 2 is sent to ECM.
- Engine Light ON (or Service Engine Soon Warning Light)
P2128 2009 Nissan Sentra DescriptionThe Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into an output voltage and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.
Need more help?Get the P2128 2009 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
P2128 2009 NISSAN SENTRA CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2128 2009 Nissan Sentra code? Have you replaced any parts?
Any information is appreciated. Thanks