OBDII Code List

P2128 2008 TOYOTA CAMRY - Throttle Pedal Position Sensor/Switch 'E' Circuit Input High

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3   
Comments  |  Add Comment

Possible causes

  • Faulty Accelerator Pedal Position (APP) Sensor
  • Accelerator Pedal Position (APP) Sensor harness is open or shorted
  • Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

Tech notes

2007-2010 Toyota Camry apply for the recall for a bad Accelerator Pedal Position (APP) Sensor. You can call Toyota and check to see if your vehicle applies for the recall.

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2128 2008 Toyota Camry Description

The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. This sensor is electronically controlled and uses Hall-effect elements.

In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.

The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.

OBDII Code P2128 2008 Toyota Camry - Throttle Pedal Position Sensor/Switch 'E' Circuit Input High -

Need more help?

Get the P2128 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

Related Information

P2128 2008 TOYOTA CAMRY Comments

Help us improve Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2128 2008 Toyota Camry code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧