P2128 2007 Toyota Highlander Code - Throttle Pedal Position Sensor/Switch 'E' Circuit Input High
Quick Answer
The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2128 2007 Toyota Highlander indicates Throttle Pedal Position Sensor/Switch 'E' Circuit Input High.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2128 2007 Toyota Highlander Description
In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.
The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.
What are the Possible Causes of the DTC P2128 2007 Toyota Highlander?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2128 2007 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2128 2007 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2128 2007 Toyota Highlander code?
Need more information on how to fix the P2128 2007 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2128 2007 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2128 2007 Toyota Highlander Code
1. What does the OBDII code P2128 on a 2007 Toyota Highlander indicate?
The code P2128 indicates an issue with the Throttle Pedal Position Sensor/Switch 'E' Circuit Input High.
2. What are the symptoms of a Throttle Pedal Position Sensor/Switch 'E' Circuit Input High issue?
Common symptoms include reduced engine power, rough idling, stalling, and difficulty accelerating.
3. What are the possible causes of the P2128 code in a 2007 Toyota Highlander?
Potential causes include a faulty throttle pedal position sensor, wiring issues, a defective throttle body, or a problem with the engine control module.
4. How can I diagnose the Throttle Pedal Position Sensor/Switch 'E' Circuit Input High issue in my 2007 Toyota Highlander?
Diagnosis typically involves using a scan tool to read the OBDII code, testing the throttle pedal position sensor, inspecting the wiring for damage, and checking the throttle body for proper operation.
5. Can I continue driving my 2007 Toyota Highlander with the P2128 code?
It is not recommended to drive the vehicle with the P2128 code present, as it can lead to unsafe driving conditions and potential further damage to the engine.
6. How can I repair the Throttle Pedal Position Sensor/Switch 'E' Circuit Input High issue in my 2007 Toyota Highlander?
Repair options may include replacing the throttle pedal position sensor, repairing or replacing damaged wiring, cleaning or replacing the throttle body, or reprogramming the engine control module.
7. Is it possible to reset the P2128 code in a 2007 Toyota Highlander without fixing the underlying issue?
While you can clear the code with a scan tool, it is important to address the root cause of the problem to prevent the code from reoccurring.
8. How much does it typically cost to repair a Throttle Pedal Position Sensor/Switch 'E' Circuit Input High issue in a 2007 Toyota Highlander?
The cost of repairs can vary depending on the specific cause of the issue, but it may range from $100 to $500 or more, including parts and labor.
9. Can a DIY enthusiast fix the P2128 code in a 2007 Toyota Highlander?
Depending on your skill level and access to tools, you may be able to address simpler causes like damaged wiring, but more complex issues may require professional assistance.
10. How can I prevent the Throttle Pedal Position Sensor/Switch 'E' Circuit Input High issue in my 2007 Toyota Highlander?
Regular maintenance, such as keeping the throttle body clean, checking for wiring damage, and addressing any issues promptly, can help prevent the recurrence of the P2128 code.
Discuss the causes and fixes for P2128 2007 Toyota Highlander OBDII Code
Code P2128 2007 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
