P2128 2001 Toyota Highlander Code - Throttle Pedal Position Sensor/Switch 'E' Circuit Input High
Quick Answer
The Accelerator Pedal Position (APP) sensor is mounted on the accelerator pedal to detect the angle of the accelerator pedal. Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2128 2001 Toyota Highlander indicates Throttle Pedal Position Sensor/Switch 'E' Circuit Input High.
- Common causes
- Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position (APP) Sensor harness is open or shorted, Accelerator Pedal Position (APP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2128 2001 Toyota Highlander Description
In the accelerator pedal position sensor, the voltage applied to terminals VPA and VPA2 of the Engine Control Module (ECM) changes between 0 V and 5 V in proportion to the angle of the accelerator pedal. The VPA is a signal to indicate the actual accelerator pedal angle and is used for the engine control. VPA2 is used to detect malfunctions of the sensor itself.
The ECM monitors the accelerator pedal angle from VPA and VPA2 signal outputs, and controls the throttle motor based on these signals.
What are the Possible Causes of the DTC P2128 2001 Toyota Highlander?
- Faulty Accelerator Pedal Position (APP) Sensor
- Accelerator Pedal Position (APP) Sensor harness is open or shorted
- Accelerator Pedal Position (APP) Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2128 2001 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2128 2001 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2128 2001 Toyota Highlander code?
Need more information on how to fix the P2128 2001 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2128 2001 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2128 2001 Toyota Highlander Code
1. What are the common symptoms of OBDII code P2128 in a 2001 Toyota Highlander?
- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What does the Throttle Pedal Position Sensor/Switch 'E' Circuit Input High mean in relation to code P2128 on a 2001 Toyota Highlander?
- This indicates that the signal from the throttle position sensor is reading higher than the expected value, causing the engine control module to detect a fault.
3. What are the possible causes of OBDII code P2128 in a 2001 Toyota Highlander?
- The potential causes include a faulty throttle position sensor, damaged wiring or connectors in the throttle pedal circuit, or issues with the engine control module.
4. Can driving with OBDII code P2128 on a 2001 Toyota Highlander cause further damage to the vehicle?
- Continuing to drive with this code may lead to poor fuel economy, further engine performance issues, and potentially causing damage to other components over time.
5. How can I diagnose the Throttle Pedal Position Sensor/Switch 'E' Circuit Input High issue in my 2001 Toyota Highlander?
- Diagnosis typically involves using a scan tool to monitor the throttle position sensor's voltage output and checking for any related trouble codes in the system.
6. Is it safe to continue driving my 2001 Toyota Highlander with OBDII code P2128 present?
- It is not recommended to drive the vehicle with this code, as it can lead to unsafe driving conditions and potential damage to the engine or other components.
7. What are some repair tips for fixing OBDII code P2128 in a 2001 Toyota Highlander?
- Repair tips include checking and repairing any damaged wiring or connectors in the throttle pedal circuit, replacing the throttle position sensor if necessary, and resetting the engine control module.
8. How much does it typically cost to repair OBDII code P2128 in a 2001 Toyota Highlander?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can I reset the OBDII code P2128 in my 2001 Toyota Highlander without fixing the underlying issue?
- While you can clear the code using a scan tool, it is important to address the root cause of the problem to prevent it from recurring and potentially causing further issues.
10. Is OBDII code P2128 a common issue in 2001 Toyota Highlanders?
- While it may not be as common as some other OBDII codes, P2128 can still occur in 2001 Toyota Highlanders due to sensor or circuitry issues related to the throttle pedal position.
Discuss the causes and fixes for P2128 2001 Toyota Highlander OBDII Code
Code P2128 2001 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
