AutoCodes – Toyota – P2127 2016 Toyota RAV4

P2127 2016 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low

Quick Answer

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2016 Toyota RAV4 indicates Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low.
Common causes: Common causes include Faulty Accelerator Pedal Position (APP) Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 310

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2016 Toyota RAV4 Description

The Accelerator Pedal Position (APP) sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 (sub). This sensor is a non-contact type sensor and uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at high speeds as well as very low speeds. The voltage, which is applied to terminals VPA and VPA2 of the Engine Control Module (ECM), varies between 0.5 V and 4.75 V in proportion to the operating angle of the accelerator pedal (throttle valve). A signal from VPA indicates the actual accelerator pedal opening angle (throttle valve opening angle) and is used for engine control. A signal from VPA2 conveys the status of the VPA circuit and is used to check the accelerator pedal position sensor itself.
The ECM monitors the actual accelerator pedal opening angle (throttle valve opening angle) through the signals from VPA and VPA2 and controls the throttle actuator according to these signals.
When either the output voltage of VPA or VPA2 deviates from the standard range, or the difference between the output voltages of the 2 sensor circuits is more than the threshold, the ECM determines that there is a malfunction in the accelerator pedal position sensor. The ECM then illuminates the MIL and stores a Diagnostic Trouble Code (DTC).

OBDII Code P2127 2016 Toyota RAV4 - Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low - AutoCodes.com — P2127 2016 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low

What does this mean?

What are the Possible Causes of the DTC P2127 2016 Toyota RAV4?

Faulty Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2016 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2016 Toyota RAV4 code?

Need more information on how to fix the P2127 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2016 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2127 in a 2016 Toyota RAV4?

The common symptoms of P2127 include reduced engine power, poor acceleration, and the vehicle going into "limp mode" where it operates at a limited speed.

2. What can cause the Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low code (P2127) in a 2016 Toyota RAV4?

The P2127 code in a 2016 Toyota RAV4 is typically caused by a faulty throttle pedal position sensor/switch, damaged wiring in the sensor circuit, or a problem with the electronic throttle control system.

3. How serious is the OBDII code P2127 in a 2016 Toyota RAV4?

While the P2127 code may not cause immediate danger, it is important to address it promptly as it can lead to reduced vehicle performance and potential safety issues, especially if the vehicle goes into limp mode unexpectedly.

4. Can I continue driving my 2016 Toyota RAV4 with the P2127 code?

It is not recommended to drive your vehicle with the P2127 code present, as it can affect the performance and drivability of your Toyota RAV4. It's best to have the issue diagnosed and repaired as soon as possible.

5. How can I diagnose the Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low code in my 2016 Toyota RAV4?

Diagnosing the P2127 code involves using a scan tool to retrieve the code, checking the throttle pedal position sensor for proper operation, and inspecting the sensor circuit for any damage or loose connections.

6. What are some repair tips for fixing the P2127 code in a 2016 Toyota RAV4?

Repairing the P2127 code may involve replacing the throttle pedal position sensor, repairing any damaged wiring in the sensor circuit, or addressing any issues with the electronic throttle control system.

7. Can a DIY enthusiast fix the P2127 code in a 2016 Toyota RAV4?

While some DIY enthusiasts may be able to address the P2127 code by replacing the throttle pedal position sensor, it is recommended to have a professional mechanic diagnose and repair the issue to ensure proper resolution.

8. How much does it typically cost to repair the Throttle Pedal Position Sensor/Switch 'E' Circuit Input Low code in a 2016 Toyota RAV4?

The cost of repairing the P2127 code in a 2016 Toyota RAV4 can vary depending on the exact cause of the issue, but it may range from $150 to $400 for parts and labor.

9. Will resetting the OBDII code P2127 in my 2016 Toyota RAV4 make it go away permanently?

Resetting the P2127 code may temporarily clear the warning light, but if the underlying issue causing the code is not fixed, the code is likely to return. It's essential to diagnose and repair the root cause of the problem.

10. How long does it take to repair the P2127 code in a 2016 Toyota RAV4?

The repair time for the P2127 code in a 2016 Toyota RAV4 can vary depending on the exact cause and the availability of parts. In general, it may take a few hours to a half-day for a mechanic to diagnose and address the issue.