P2127 2016 GMC Sierra Code - Accelerator Pedal Position Sensor 2 Circuit Low Voltage
Quick Answer
The Accelerator Pedal Assembly contains 2 Accelerator Pedal Position (APP) sensors. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2127 2016 GMC Sierra indicates Accelerator Pedal Position Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2127 2016 GMC Sierra Description
Both the APP sensors 1 and 2 signal percentages increase as the pedal is depressed, from approximately 0 percent at rest to above 95 percent when fully depressed.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the APP sensor 2 voltage is less than 0.32 V for less than 1 s.
What are the Possible Causes of the DTC P2127 2016 GMC Sierra?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2127 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2127 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2127 2016 GMC Sierra code?
Need more information on how to fix the P2127 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2127 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2127 2016 GMC Sierra Code
1. What does the OBDII code P2127 mean on a 2016 GMC Sierra?
P2127 indicates a low voltage issue in the Accelerator Pedal Position (APP) Sensor 2 circuit, which monitors the position of the accelerator pedal.
2. What are the common symptoms of code P2127 in a 2016 GMC Sierra?
Symptoms may include reduced engine performance, the vehicle entering "limp mode," poor throttle response, and the Check Engine Light being illuminated.
3. What causes the P2127 code to appear on a 2016 GMC Sierra?
Common causes include a faulty APP sensor, damaged wiring or connectors in the APP circuit, a defective throttle body, or issues with the powertrain control module (PCM).
4. Can I drive my 2016 GMC Sierra with the P2127 code?
It’s not recommended, as the vehicle may experience reduced power, poor acceleration, or unexpected behavior that could compromise safety.
5. How do I diagnose the P2127 code in my 2016 GMC Sierra?
Start by inspecting the APP sensor and its wiring for damage or corrosion. Use a multimeter to check voltage and continuity, and possibly scan for related trouble codes.
6. How is the P2127 code repaired on a 2016 GMC Sierra?
Repairs may include replacing the APP sensor, repairing or replacing damaged wiring/connectors, cleaning the throttle body, or reprogramming the PCM if necessary.
7. How much does it cost to fix the P2127 code on a 2016 GMC Sierra?
Repair costs vary but typically range from $100 to $300 for parts and labor, depending on whether the APP sensor, wiring, or other components need replacement.
8. Can a dirty throttle body cause the P2127 code in a 2016 GMC Sierra?
While not a primary cause, a dirty throttle body can affect throttle response and should be cleaned as part of the diagnostic process.
9. Will clearing the P2127 code fix the problem on a 2016 GMC Sierra?
Clearing the code will temporarily turn off the Check Engine Light, but the underlying issue must be resolved to prevent the code from returning.
10. How can I prevent the P2127 code from occurring on my 2016 GMC Sierra?
Regular maintenance, including inspecting the APP sensor and its wiring, ensuring the throttle body is clean, and addressing electrical issues promptly, can help prevent this code.
Discuss the causes and fixes for P2127 2016 GMC Sierra OBDII Code
Code P2127 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
