P2127 2014 GMC Sierra Code - Accelerator Pedal Position Sensor 2 Circuit Low Voltage
Quick Answer
The Accelerator Pedal Assembly contains 2 Accelerator Pedal Position (APP) sensors. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2127 2014 GMC Sierra indicates Accelerator Pedal Position Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2127 2014 GMC Sierra Description
Both the APP sensors 1 and 2 signal percentages increase as the pedal is depressed, from approximately 0 percent at rest to above 95 percent when fully depressed.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the APP sensor 2 voltage is less than 0.32 V for less than 1 s.
What are the Possible Causes of the DTC P2127 2014 GMC Sierra?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2127 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2127 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2127 2014 GMC Sierra code?
Need more information on how to fix the P2127 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2127 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2127 2014 GMC Sierra Code
What does the OBDII code P2127 mean for a 2014 GMC Sierra?
P2127 indicates a low voltage issue in the Accelerator Pedal Position (APP) Sensor 2 circuit, which monitors the position of the accelerator pedal.
What are the common symptoms of a P2127 code?
Symptoms include reduced engine power, hesitation during acceleration, the "Check Engine" light turning on, and possibly entering limp mode.
What causes the P2127 code to appear?
Common causes include a faulty APP sensor, damaged wiring or connectors, a malfunctioning throttle body, or a problem with the engine control module (ECM).
Can I drive my 2014 GMC Sierra with the P2127 code?
While the vehicle may still be drivable, it could experience reduced performance or enter limp mode. Driving with this code for an extended period is not recommended.
How do I diagnose the P2127 code?
Start by inspecting the APP sensor and its wiring for damage or loose connections. Use a multimeter to check for proper voltage and continuity in the circuit.
How do I fix the P2127 code on my GMC Sierra?
Repairs may involve replacing the APP sensor, repairing damaged wires or connectors, updating or reprogramming the ECM, or addressing any throttle body issues.
How much does it cost to repair a P2127 code?
The cost varies depending on the issue. Replacing an APP sensor typically costs $100–$300, while more extensive wiring or ECM repairs may cost more.
Can a dirty throttle body cause the P2127 code?
While uncommon, a dirty or malfunctioning throttle body can contribute to issues with the APP sensor, potentially triggering the code.
Does the P2127 code require APP sensor replacement?
Not always. The problem could also stem from wiring issues, a faulty ECM, or other related components. Proper diagnosis is essential before replacing parts.
Will clearing the P2127 code with a scanner fix the problem?
Clearing the code may temporarily turn off the "Check Engine" light, but it won't address the underlying issue causing the code to appear.
Discuss the causes and fixes for P2127 2014 GMC Sierra OBDII Code
Code P2127 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
