AutoCodes – Nissan – P2127 2012 Nissan Pathfinder

P2127 2012 Nissan Pathfinder Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2012 Nissan Pathfinder indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,807

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2012 Nissan Pathfinder Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2012 Nissan Pathfinder - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2012 Nissan Pathfinder Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2012 Nissan Pathfinder?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2012 Nissan Pathfinder?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2012 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2012 Nissan Pathfinder code?

Need more information on how to fix the P2127 2012 Nissan Pathfinder code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2012 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2012 Nissan Pathfinder Code

1. What are the common symptoms of OBDII code P2127 in a 2012 Nissan Pathfinder?

The common symptoms of OBDII code P2127 in a 2012 Nissan Pathfinder include issues with acceleration, reduced engine power, and the vehicle going into "limp mode."

2. What does OBDII code P2127 indicate in a 2012 Nissan Pathfinder?

OBDII code P2127 in a 2012 Nissan Pathfinder indicates a problem with the Accelerator Pedal Position Sensor Circuit.

3. What are the possible causes of OBDII code P2127 in a 2012 Nissan Pathfinder?

Possible causes of OBDII code P2127 in a 2012 Nissan Pathfinder include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.

4. How can I diagnose the OBDII code P2127 in my 2012 Nissan Pathfinder?

Diagnosing OBDII code P2127 in a 2012 Nissan Pathfinder involves using a scan tool to retrieve the code, checking the wiring and connectors of the accelerator pedal position sensor, and testing the sensor itself for proper operation.

5. Can I still drive my 2012 Nissan Pathfinder with OBDII code P2127?

It is not recommended to drive your 2012 Nissan Pathfinder with OBDII code P2127, as it can lead to issues with acceleration and engine performance, potentially causing safety hazards.

6. How can I repair OBDII code P2127 in my 2012 Nissan Pathfinder?

Repairing OBDII code P2127 in a 2012 Nissan Pathfinder may involve replacing the accelerator pedal position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module.

7. Is it possible to reset OBDII code P2127 in a 2012 Nissan Pathfinder without fixing the underlying issue?

Resetting OBDII code P2127 in a 2012 Nissan Pathfinder without fixing the underlying issue will likely result in the code reappearing once the vehicle is driven and the problem is detected again.

8. How much does it cost to repair OBDII code P2127 in a 2012 Nissan Pathfinder?

The cost to repair OBDII code P2127 in a 2012 Nissan Pathfinder can vary depending on the cause of the issue, the parts needed for repair, and labor costs. It is recommended to consult a mechanic for an accurate estimate.

9. Can a DIY enthusiast fix OBDII code P2127 in a 2012 Nissan Pathfinder?

A DIY enthusiast may be able to fix OBDII code P2127 in a 2012 Nissan Pathfinder if they have the necessary tools, knowledge, and skills to diagnose and repair issues related to the accelerator pedal position sensor circuit.

10. How often does OBDII code P2127 occur in a 2012 Nissan Pathfinder?

OBDII code P2127 in a 2012 Nissan Pathfinder can occur due to various factors, including sensor wear and tear, electrical issues, or environmental factors. It is not uncommon, but regular maintenance and inspections can help prevent this code from appearing.