AutoCodes – Nissan – P2127 2012 Nissan Altima Sedan

P2127 2012 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2012 Nissan Altima Sedan indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,783

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 12, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2012 Nissan Altima Sedan Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2012 Nissan Altima Sedan - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2012 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2012 Nissan Altima Sedan?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2012 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2012 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2012 Nissan Altima Sedan code?

Need more information on how to fix the P2127 2012 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2012 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2012 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P2127 in a 2012 Nissan Altima Sedan?

- Common symptoms include a decrease in acceleration response, the vehicle going into limp mode, and the Check Engine light illuminating.

2. What does the OBDII code P2127 for a 2012 Nissan Altima Sedan indicate?

- OBDII code P2127 indicates an issue with the accelerator pedal position sensor circuit.

3. What are the possible causes of OBDII code P2127 in a 2012 Nissan Altima Sedan?

- Possible causes include a faulty accelerator pedal position sensor, damaged wiring or connectors in the circuit, or issues with the engine control module.

4. How can I diagnose the OBDII code P2127 in my 2012 Nissan Altima Sedan?

- Diagnosis typically involves using a scan tool to read the code, checking the accelerator pedal position sensor and its wiring for any visible damage, and testing the sensor's voltage output.

5. Can I continue driving my 2012 Nissan Altima Sedan with OBDII code P2127?

- It is not recommended to continue driving with this code as it can lead to performance issues and potential safety hazards. It's best to address the issue promptly.

6. How can I repair OBDII code P2127 in my 2012 Nissan Altima Sedan?

- Repair options may include replacing the accelerator pedal position sensor, repairing any damaged wiring or connectors, or reprogramming the engine control module.

7. Is it possible to reset the OBDII code P2127 in a 2012 Nissan Altima Sedan without fixing the underlying issue?

- While you can clear the code with a scan tool, it is crucial to address the root cause of the problem to prevent it from recurring and potentially causing further damage.

8. Are there any DIY tips for troubleshooting OBDII code P2127 in a 2012 Nissan Altima Sedan?

- DIY tips include visually inspecting the accelerator pedal position sensor and its wiring, checking for loose connections, and ensuring proper voltage levels.

9. Can a 2012 Nissan Altima Sedan with OBDII code P2127 still pass an emissions test?

- A vehicle with an unresolved OBDII code like P2127 is likely to fail an emissions test. It's recommended to address the issue before attempting an emissions test.

10. How long does it typically take to repair OBDII code P2127 in a 2012 Nissan Altima Sedan?

- Repair times can vary depending on the exact cause of the issue and the availability of parts. It's advisable to consult a professional mechanic for an accurate estimate.