AutoCodes – Nissan – P2127 2010 Nissan Rogue

P2127 2010 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2010 Nissan Rogue indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,577

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2010 Nissan Rogue Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2010 Nissan Rogue - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2010 Nissan Rogue Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2010 Nissan Rogue?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2010 Nissan Rogue code?

Need more information on how to fix the P2127 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P2127 in a 2010 Nissan Rogue?

- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.

2. What does OBDII code P2127 on a 2010 Nissan Rogue indicate?

- OBDII code P2127 for Accelerator Pedal Position Sensor Circuit Low Voltage indicates a potential issue with the sensor responsible for monitoring the position of the accelerator pedal.

3. What are the possible causes of OBDII code P2127 in a 2010 Nissan Rogue?

- The possible causes include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module.

4. How can I diagnose the cause of OBDII code P2127 in my 2010 Nissan Rogue?

- Diagnosis typically involves checking the sensor's wiring and connectors for damage, testing the sensor's voltage output, and scanning for any related trouble codes in the system.

5. Can I still drive my 2010 Nissan Rogue with OBDII code P2127?

- It is not recommended to drive the vehicle with OBDII code P2127, as it can lead to unsafe driving conditions and potential further damage to the engine.

6. How can I repair OBDII code P2127 in my 2010 Nissan Rogue?

- Repairing OBDII code P2127 usually involves replacing the faulty accelerator pedal position sensor and ensuring all wiring and connectors in the circuit are in good condition.

7. Will resetting the OBDII code P2127 on my 2010 Nissan Rogue make it go away permanently?

- Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the code is not fixed, the code is likely to return.

8. How much does it typically cost to repair OBDII code P2127 in a 2010 Nissan Rogue?

- The cost of repair can vary depending on the cause of the issue, but typically, replacing the accelerator pedal position sensor can cost between $100 to $300, including parts and labor.

9. Are there any preventive maintenance steps to avoid OBDII code P2127 in a 2010 Nissan Rogue?

- Regularly inspecting the accelerator pedal position sensor and its wiring for any signs of wear or damage can help prevent issues that may trigger OBDII code P2127.

10. Can a DIY enthusiast repair OBDII code P2127 in a 2010 Nissan Rogue?

- While some DIY enthusiasts may have the skills to replace the accelerator pedal position sensor, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure the issue is resolved correctly.