AutoCodes – Nissan – P2127 2009 Nissan Pathfinder

P2127 2009 Nissan Pathfinder Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2009 Nissan Pathfinder indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,970

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2009 Nissan Pathfinder Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2009 Nissan Pathfinder - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2009 Nissan Pathfinder Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2009 Nissan Pathfinder?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2009 Nissan Pathfinder?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2009 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2009 Nissan Pathfinder code?

Need more information on how to fix the P2127 2009 Nissan Pathfinder code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2009 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2009 Nissan Pathfinder Code

1. What are the common symptoms of OBDII code P2127 in a 2009 Nissan Pathfinder?

- Common symptoms include a lack of response from the accelerator pedal, reduced engine power, and the vehicle going into limp mode.

2. What can cause the OBDII code P2127 to trigger in a 2009 Nissan Pathfinder?

- The code P2127 is typically triggered by a fault in the accelerator pedal position sensor circuit, such as a malfunctioning sensor or wiring issue.

3. How serious is the OBDII code P2127 in a 2009 Nissan Pathfinder?

- The code P2127 is considered a serious issue as it can affect the vehicle's drivability by limiting acceleration and power.

4. What are some possible DIY repair tips for addressing OBDII code P2127 in a 2009 Nissan Pathfinder?

- DIY repair tips may include checking the accelerator pedal sensor for proper operation, inspecting the wiring for any damage, and clearing the code with an OBDII scanner.

5. Can driving with the OBDII code P2127 in a 2009 Nissan Pathfinder cause further damage?

- Continuing to drive with the code P2127 may lead to poor vehicle performance and potentially cause damage to other components if left unresolved.

6. How much does it typically cost to repair the OBDII code P2127 in a 2009 Nissan Pathfinder?

- Repair costs for the OBDII code P2127 can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor.

7. Is it safe to continue driving a 2009 Nissan Pathfinder with the OBDII code P2127?

- It is not recommended to drive the vehicle with the code P2127 as it can impact safety and performance. It's best to address the issue promptly.

8. Can the OBDII code P2127 in a 2009 Nissan Pathfinder be temporarily reset by disconnecting the battery?

- Disconnecting the battery may temporarily reset the code, but if the underlying issue is not addressed, the code is likely to reappear.

9. Are there any recalls or technical service bulletins related to the OBDII code P2127 in a 2009 Nissan Pathfinder?

- It's recommended to check with Nissan or consult online resources for any recalls or technical service bulletins related to the code P2127 in a 2009 Pathfinder.

10. How can a mechanic diagnose the OBDII code P2127 in a 2009 Nissan Pathfinder?

- A mechanic can diagnose the code P2127 using a scan tool to read the code, testing the accelerator pedal position sensor, and inspecting the wiring for faults.