AutoCodes – Nissan – P2127 2009 Nissan Altima Sedan

P2127 2009 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit

Quick Answer

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2127 2009 Nissan Altima Sedan indicates Accelerator Pedal Position Sensor Circuit.
Common causes: Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,896

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2127 2009 Nissan Altima Sedan Description

The Accelerator Pedal Position (APP) Sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM). Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals. Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation such as fuel cut.

OBDII Code P2127 2009 Nissan Altima Sedan - Accelerator Pedal Position Sensor Circuit - AutoCodes.com — P2127 2009 Nissan Altima Sedan Code - Accelerator Pedal Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P2127 2009 Nissan Altima Sedan?

Faulty Accelerator Pedal Position Sensor
Accelerator Pedal Position Sensor harness is open or shorted
Accelerator Pedal Position Sensor circuit poor electrical connection
Faulty Electric Throttle Control Actuator (TP Sensor 1 and 2)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2127 2009 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2127 2009 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2127 2009 Nissan Altima Sedan code?

Need more information on how to fix the P2127 2009 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2127 2009 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2127 2009 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code P2127 in a 2009 Nissan Altima Sedan?

- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into "limp mode."

2. What causes the OBDII code P2127 in a 2009 Nissan Altima Sedan?

- The code P2127 is typically caused by a fault in the accelerator pedal position sensor circuit, which may be due to a faulty sensor, wiring issue, or connector problem.

3. How can I diagnose the issue causing OBDII code P2127 in my 2009 Nissan Altima Sedan?

- Diagnosing the issue involves checking the accelerator pedal position sensor for proper operation, inspecting the wiring for damage or loose connections, and using a scan tool to monitor sensor data.

4. Is it safe to continue driving my 2009 Nissan Altima Sedan with OBDII code P2127?

- It is not recommended to drive the vehicle with code P2127, as it can lead to unsafe driving conditions due to potential loss of engine power or acceleration issues.

5. Can I repair the OBDII code P2127 in my 2009 Nissan Altima Sedan myself?

- Depending on your skill level and access to tools, you may be able to repair the issue yourself by replacing the accelerator pedal position sensor or addressing any wiring/connectivity problems.

6. How much does it typically cost to repair OBDII code P2127 in a 2009 Nissan Altima Sedan at a repair shop?

- Repair costs can vary based on the labor rates and parts prices, but typically, the repair for OBDII code P2127 involves replacing the accelerator pedal position sensor, which may cost a few hundred dollars.

7. Can a faulty accelerator pedal position sensor cause other OBDII codes to appear in a 2009 Nissan Altima Sedan?

- Yes, a faulty accelerator pedal position sensor can trigger related codes such as P2128, P2123, or P2138, as they are all related to the sensor's circuitry.

8. Will resetting the OBDII code P2127 in my 2009 Nissan Altima Sedan make the issue go away?

- Resetting the code may temporarily clear the warning light, but if the underlying issue causing code P2127 is not addressed, the code will likely reappear.

9. Are there any preventive measures to avoid OBDII code P2127 in a 2009 Nissan Altima Sedan?

- Regular maintenance and inspections of the accelerator pedal position sensor and its associated components can help prevent issues that lead to code P2127.

10. Can extreme weather conditions affect the accelerator pedal position sensor circuit and trigger OBDII code P2127 in a 2009 Nissan Altima Sedan?

- Extreme weather conditions, such as extreme heat or cold, can potentially affect the sensor's performance and lead to issues that trigger code P2127.